DI Box

Line Isolator + 4dB passive stereo sound engineers demanding

ARTICLE N° 15683
  • Radial Twin-Iso is a line stereo passive isolator + 4dB specially developed for professional sound reinforcement systems to eliminate hums and other buzzs caused by ground loops caused by interfacing equipment 2 between them (2 mixers for example).
  • Frequency Response 10Hz - 50kHz +/- 1dB
  • Output level max + 21dBu (20Hz, 1% THD)
  • Phase Distortion 0.3 degrees at 20Hz
  • 0.001% THD THD A1K, +4 dBu (0.035% to 20Hz)
  • Balanced Inputs 600-Ohm, line-level, pin-2 hot
  • Balanced outputs 600-Ohm, line-level, pin-2 hot
  • In the Twin-Iso 2 Jensen transformers are internationally recognized for their sound quality. These ensure the best possible signal transfer without any distortion of the signal. All connections are made to standard XLR AES. A polarity switch is available on each channel for flexibility.
  • The Twin-Iso can be rack mounted using the J-Rak (up to 8 per rack) or installed discreetly under a conference table with the J-Clamp. The Radial Twin-Iso is a simple but extremely effective tool for professional audio and sound system designer.
  • Outstanding Features:
  • 2 Jensen transformers
  • Cash + 22dBu signals up
  • Channel polarity Switch
  • Applications:
  • Submix 2 consoles
  • Mixer deported to amp
  • Mixer to recorder
Radial Twin-Iso is a line stereo passive isolator + 4dB specially developed for professional sound reinforcement systems to eliminate hums and other buzzs caused by ground loops caused by interfacing between 2 devices them (2 mixers for example).
Multichannel
 Yes
Mass switch
 Yes
Active / passive
 Passive

Spotlight on