Saramonic - UwMic9 Kit1
This product is no longer available for sale
These models in stock may be of interest to you:
274,17 €
excl VAT
including eco-part : 0,07 €
Guarantee 3
years
Jessie
Louis
Do you need help?
Camera microphone
Transmitter + Tie microphone + Receiver set
ARTICLE N° 82334
Presentation
UHF kit including TX9 transmitter, RX9 receiver and SR-M1 lapel microphone
Comprising a TX9 transmitter, an RX9 two-way receiver and an SR-M1 lapel microphone, the UwMic9 RX9+TX9 kit is ideal for content creators, vloggers, youtubers or journalists on the move who want to record a voice on a digital camera or camcorder.
Compact, lightweight and robust (metal chassis), the various components of the kit can be paired quickly by infrared and are extremely easy to use.
Combined with the SR-M1 omnidirectional lapel microphone, they deliver high-quality sound and professional features.
The TX9 and RX9 operate on ultra-high frequencies (514-596 MHz) to limit interference, and automatically scan the different channels available to find the best one.
The backlit LCD screens on the TX9 and RX9 make it easy to navigate through their various menus, even in low-light environments.
The RX9 mounts directly onto the flash shoe of a digital camera or camcorder and can receive signals from two different Saramonic transmitters simultaneously.
It incorporates a headphone output (3.5mm) to control the sound level during recording.
This wireless kit has a range of up to 100 metres.
Comprising a TX9 transmitter, an RX9 two-way receiver and an SR-M1 lapel microphone, the UwMic9 RX9+TX9 kit is ideal for content creators, vloggers, youtubers or journalists on the move who want to record a voice on a digital camera or camcorder.
Compact, lightweight and robust (metal chassis), the various components of the kit can be paired quickly by infrared and are extremely easy to use.
Combined with the SR-M1 omnidirectional lapel microphone, they deliver high-quality sound and professional features.
The TX9 and RX9 operate on ultra-high frequencies (514-596 MHz) to limit interference, and automatically scan the different channels available to find the best one.
The backlit LCD screens on the TX9 and RX9 make it easy to navigate through their various menus, even in low-light environments.
The RX9 mounts directly onto the flash shoe of a digital camera or camcorder and can receive signals from two different Saramonic transmitters simultaneously.
It incorporates a headphone output (3.5mm) to control the sound level during recording.
This wireless kit has a range of up to 100 metres.
Other features
-
Saramonic UwMic9 Kit1
-
Kit 1 pocket transmitter + tie microphone + 1 2-channel receiver :
-
1 RX9 receiver
-
Channel group: A and B
-
Oscillator: PLL synthesiser
-
Connections Audio output: 3.5 mm mini jack
-
Antenna: 1/4
-
Audio output level: -60 dBV
-
Headphone output level: 30mW
-
Carrier frequencies: 514MHz - 596MHz
-
Sensitivity: -95 dBm
-
Signal-to-noise ratio: 70 dB or more
-
Delay: 12 milliseconds
-
Reference deviation: ±5 kHz (-60 dBV, 1 kHz input)
-
Frequency response: 40 Hz to 18 kHz (+/-3dB)
-
Distortion: 0.5% or less
-
Power supply: 2 x 1.5 V AA batteries
-
Dimensions: 171 × 64 × 30 mm
-
Weight: 219g
-
1 TX9 transmitter
-
Channel group: A and B
-
Oscillator: PLL synthesiser
-
Carrier frequencies: 514MHz - 596MHz
-
Reference deviation: ±5 kHz (-60 dBV, 1 kHz input)
-
Signal-to-noise ratio: 70 dB or more
-
Delay: 12 milliseconds
-
Antenna: 1/4
-
Audio input connector: 3.5 mm mini jack
-
Reference audio input level: -60 dBV (MIC input, 0 dB attenuation)
-
RF output level: 10mW
-
Distortion: 0.5% or less
-
Power supply: 2 x 1.5V AA batteries
-
Dimensions: 171 x 64 x 30 mm
-
Weight: 211g
-
Supplied with :
-
1 SR-M1 omnidirectional lapel microphone
-
1 Camera cable: 3.5mm TRS mini jack / 3.5mm TRS mini jack
-
1 recorder cable: 3.5mm mini TRS jack / XLR
-
1 Camera shoe, for the receiver
-
2 belt clips
-
1 manual
