Tech21 - Acoustic Fly Rig
249,17 €
excl VAT
including eco-part : 0,90 €
In Stock
Usually ships within 3 days
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Electro Acoustic Guitar Effects
With the Acoustic Fly Rig multi-effects pedal, you transform your audio experience into something memorable. It is designed to enrich the tone of any guitar, whether modest or high-end. It sports features such as an analog SansAmp, a parametric EQ, a boost, a compressor, a delay with adjustable tempo, and an independent reverb. Compact and practical, it easily slips into your gig bag.
ARTICLE N° 97941
Presentation
The SansAmp Acoustic Fly Rig is a fully analog preamp that stands out for its active semi-parametric EQ controls. They offer professional flexibility for any situation.
It is equipped with a Notch filter that is adjustable from 70 Hz to 350 Hz. This filter is designed to reduce the sensitivity to feedback caused by the low frequencies of acoustic guitars. The low-pass filter, adjustable from 16 kHz to 1.5 kHz, eliminates unwanted frequencies and artifacts.
The cabinet simulation, which is 100% analog, covers the entire signal chain, from the amp to the cabinet simulation. It is designed for a homogeneous response. This response is comparable to that of a multiple microphone booth. An independent Boost, up to 12 dB, allows you to enhance solos with an increase in the mids.
The Comp uses analog FET technology that offers warm and transparent compression. The Reverb function emulates the rich ambience of open spaces, from the room to the hall. The DLA provides an analog delay with Time and Repeats controls. The CHR is a preset chorus based on pitch-shifting technology for a 12-string style sound.
The chromatic tuner is integrated into the EFX section and is triggered by holding the TAP/TUNER footswitch while muting the signal. Other features include a Phase Flip switch to combat feedback, XLR and 1/4" outputs, and rugged metal construction.
It is equipped with a Notch filter that is adjustable from 70 Hz to 350 Hz. This filter is designed to reduce the sensitivity to feedback caused by the low frequencies of acoustic guitars. The low-pass filter, adjustable from 16 kHz to 1.5 kHz, eliminates unwanted frequencies and artifacts.
The cabinet simulation, which is 100% analog, covers the entire signal chain, from the amp to the cabinet simulation. It is designed for a homogeneous response. This response is comparable to that of a multiple microphone booth. An independent Boost, up to 12 dB, allows you to enhance solos with an increase in the mids.
The Comp uses analog FET technology that offers warm and transparent compression. The Reverb function emulates the rich ambience of open spaces, from the room to the hall. The DLA provides an analog delay with Time and Repeats controls. The CHR is a preset chorus based on pitch-shifting technology for a 12-string style sound.
The chromatic tuner is integrated into the EFX section and is triggered by holding the TAP/TUNER footswitch while muting the signal. Other features include a Phase Flip switch to combat feedback, XLR and 1/4" outputs, and rugged metal construction.
Other features
-
Tech21 Acoustic Fly Rig
-
Multi-effects for acoustic instruments
-
Boost section +12dB (setting: Boost)
-
Comp section (settings: comp and level)
-
Sansamp section (settings: 3-band semi-parametric EQ, notch, LPF and level)
-
Delay section (settings: time, level, repeats)
-
Reverb - phase switch - Tap tempo - built-in tuner
-
1/4-inch 1megOhm input
-
XLR output with ground lift
-
1/4-inch low impedance output
-
Headphone button switches the 1/4-inch output to headphone mode
-
Rugged all-metal housing
-
Metal pedals and jacks
-
Custom pedal actuators with silent switching
-
Metal chassis with orange finish
-
9V DC transformer included: model no. DC9
-
Weight: 0.58 Kg
-
Dimensions: 317 x 64 x 32 mm
