B&C Speakers - 12FL76 8 Ohm
140 €
excl VAT
including eco-part : 0,90 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Speaker driver
The B&C 12FL76 8 Ohm is a versatile 12-inch loudspeaker, perfectly suited to voice applications and full-range systems. With a power handling capacity of 800 W and a sensitivity of 97.5 dB, it delivers clear, frontal and dynamic sound.
ARTICLE N° 104910
Presentation
The 12FL76 from B&C Speakers is aimed at those looking for a full-range loudspeaker capable of delivering a highly directional midrange, without having to rely systematically on DSP or advanced digital processing.
It's a wise choice for applications such as KTV, voice announcing, or simple two-way systems, where the presence of the voice is paramount.
With its 12-inch format and extended response from 50 to 4000 Hz, it covers a good part of the useful spectrum, particularly in the bass and midrange. Its 76 mm aluminium voice coil is mounted on a fibreglass support, and provides efficient heat dissipation thanks to its 11 mm air gap. This robust assembly delivers a continuous power output of 400 W (up to 800 W in programme), with good stability even in prolonged use.
This loudspeaker also stands out for its sensitivity of 97.5 dB, which enables it to generate significant acoustic pressure with relatively little power. This makes it an ideal solution for passive or semi-active systems. Its double-roller suspension, rigid basket and waterproof cone at the front ensure long life, even in the most demanding environments.
The mechanical behaviour is well balanced, with an Xmax of 6 mm, a BL of 18.7 T-m, and an alignment of parameters that allows it to be mounted in bass-reflex speakers of around 40 litres, tuned around 55 Hz. The result is a clear, dynamic and effortless reproduction, with a very expressive midrange.
It's a wise choice for applications such as KTV, voice announcing, or simple two-way systems, where the presence of the voice is paramount.
With its 12-inch format and extended response from 50 to 4000 Hz, it covers a good part of the useful spectrum, particularly in the bass and midrange. Its 76 mm aluminium voice coil is mounted on a fibreglass support, and provides efficient heat dissipation thanks to its 11 mm air gap. This robust assembly delivers a continuous power output of 400 W (up to 800 W in programme), with good stability even in prolonged use.
This loudspeaker also stands out for its sensitivity of 97.5 dB, which enables it to generate significant acoustic pressure with relatively little power. This makes it an ideal solution for passive or semi-active systems. Its double-roller suspension, rigid basket and waterproof cone at the front ensure long life, even in the most demanding environments.
The mechanical behaviour is well balanced, with an Xmax of 6 mm, a BL of 18.7 T-m, and an alignment of parameters that allows it to be mounted in bass-reflex speakers of around 40 litres, tuned around 55 Hz. The result is a clear, dynamic and effortless reproduction, with a very expressive midrange.
Other features
-
B&C Speakers 12FL76 8 Ohm
-
12-inch cone loudspeaker
-
Nominal impedance: 8 Ohm
-
Coverage type: subwoofer, bass, low midrange
-
Rated power: 400 W
-
Programme power: 800 W
-
Sensitivity: 97.5 dB
-
Frequency response: 50 Hz - 4000 Hz
-
Coil diameter: 76 mm (3 inches)
-
Wire type: aluminium
-
Coil support: fibreglass
-
Coil height: 17 mm
-
Air gap height: 11 mm
-
Magnetic system: ferrite
-
Cone shape: exponential
-
Salad tray: cast aluminium
-
Suspension: double roller
-
Spider: single
-
Cone treatment: WP Waterproof (front)
-
Demodulation ring: no
-
Emissive surface area (Sd): 522 cm2
-
Moving mass (Mms): 64 g
-
Compliance (Cms): 107.7 µm/N
-
Inductance (Le): 1 mH
-
DC resistance (Re): 5.4 Ohm
-
BL factor: 18.7 T-m
-
Resonance frequency (Fs): 50 Hz
-
Qts: 0.3 / Qes: 0.32 / Qms: 5.8
-
Vas: 57 dm³
-
Xmax: ±6 mm
-
Xvar: 7.5 mm
-
Efficiency: 2.4
-
EBP: 156 Hz
-
Occupied air volume: 3 dm³
-
Recommended enclosure: 40 dm³
-
Recommended tuning: 55 Hz
-
Outside diameter: 315 mm
-
Flush-mounted diameter: 282 mm
-
Front panel thickness: 13 mm
-
Depth: 140 mm
-
Net weight: 6.85 kg
-
Shipping weight: 7.75 kg
Additional documents
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
