B&C Speakers - Recone Kit 18PZB46 8 Ohm
109,17 €
excl VAT
Out of stock
Guarantee 3
years
Jessie
Louis
Do you need help?
The Recone Kit 18PZB46 8 Ohm from B&C Speakers is a reliable solution for users who demand power, mechanical stability and extended low-frequency response.
ARTICLE N° 106436
Presentation
The Recone Kit 18 PZB 46 8 Ohm includes all the components needed to restore the motor: 100 mm copper coil, double spider, treated diaphragm, central dome, centring and appropriate connectors. The whole unit has been specifically designed to deliver the same power handling (up to 1400 W in continuous programme) and linear excursion as the original model. Its efficiency, measured at 97 dB SPL at 1 W/1 m, as well as its sensitivity over the entire useful band (40 Hz - 2 kHz), remain faithful to the factory specifications.
The initial structure is based on a long coil mounted on a glass fibre support, immersed in an 8 mm magnetic gap, with a 21 mm winding and a 1.15 T flux. The overall electroacoustic behaviour - with a Qts of 0.37, a Vas of 155 litres and an Xmax of ±8 mm - makes it an ideal loudspeaker for pure bass or subwoofers with a relatively controlled load volume.
This replacement kit is the ideal solution for extending the life of a B&C 18PZB46 8 Ohm loudspeaker without compromising performance or reliability. Each component complies with the original technical specifications to ensure perfect compatibility and long-lasting return to service, with minimal distortion and excellent mechanical strength, even under heavy load.
Easy to install for experienced technicians, this kit is a wise choice for service providers, repairers or integrators wishing to maintain a system without having to start from scratch with a complete new loudspeaker.
The initial structure is based on a long coil mounted on a glass fibre support, immersed in an 8 mm magnetic gap, with a 21 mm winding and a 1.15 T flux. The overall electroacoustic behaviour - with a Qts of 0.37, a Vas of 155 litres and an Xmax of ±8 mm - makes it an ideal loudspeaker for pure bass or subwoofers with a relatively controlled load volume.
This replacement kit is the ideal solution for extending the life of a B&C 18PZB46 8 Ohm loudspeaker without compromising performance or reliability. Each component complies with the original technical specifications to ensure perfect compatibility and long-lasting return to service, with minimal distortion and excellent mechanical strength, even under heavy load.
Easy to install for experienced technicians, this kit is a wise choice for service providers, repairers or integrators wishing to maintain a system without having to start from scratch with a complete new loudspeaker.
Other features
-
B&C Speakers 18PZB46 Recone Kit
-
Complete speaker repair kit
-
Compatible with: model 18PZB46, 8 Ω
-
Components included: radial cone, bonnet, silicone suspensions, foam gasket, shims, heat shrink tubing
-
Nominal impedance: 8 Ω
-
Resonant frequency: 37 Hz
-
Frequency response : 40 Hz - 2000 Hz
-
Kit reference : RCK018PZB468
-
Sales unit: 1 Kit
-
ATTENTION: Glue not included
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
