Dmx Splitters

Splitter / Booster DMX professional 6 channel 19 "rack 1U six isolated outputs galvanically on XLR 3 points / 5 points, DMX status indicators per channel and power, terminating resistor 120 ohm on the output connector DMX THRU. It connects directly to DMX console or to the controller.

ARTICLE N° 50029
  • Cameo SB 6 DUAL
  • Splitter / Booster DMX 6 channels (XLR 3 points and 5 points)
  • Type: Protocol DMX 512
  • Number of Inputs DMX: 2 (in parallel)
  • Input Connectors DMX: XLR 3 points male XLR 3 pin male
  • Number of references DMX Thru: 2 (in parallel)
  • Reference connectors DMX Thru XLR 3 pin female XLR 5 points female
  • Number of DMX Outputs: 6 (electrically isolated)
  • Output connectors DMX XLR 3-pin female XLR 3-pin female
  • Controls: Keys Power on / Off switch DMX Thru Terminator
  • Indicators: 6 x LEDs Power, 6 x LED Signal
  • Base Area: IEC Format
  • Power: toroidal transformer
  • Area voltage: 230 V, 50 Hz
  • Power consumption (max): 15 W
  • Dimensions (L x H x D): 483 x 44 x 160 mm
  • Weight: 3 kgs
  • Accessories included: Power Cord
Cameo CLSB6D is a professional solution for DMX network configuration. This splitter / booster in 19 "amplifies the DMX signal and sends 6 galvanically isolated outputs. It connects directly to the DMX console or DMX controller. Input connectors and THRU, for the return of signal, are available on the front and on the rear panel of CLSB6D they are doubled, and wired in parallel bright LEDs indicate the front panel, the DMX and Power channel status;. outputs are grouped on the rear panel. a 120 ohm termination resistor is switched on output DMX THRU, the unit has its own power switch and comes with its IEC cable to mount the unit upside down and ensure better access to the connectors, ears. rack can be fixed to the rear of the chassis.
3-pin XLR outputs
 Yes
5-pin XLR outputs
 Yes
Compatible 19"
 Yes