DBX - ZC-FIRE
New
100 €
excl VAT
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
The DBX ZC-FIRE enables a fire safety system to be integrated into an audio installation fitted with a ZonePRO processor. When an alarm is triggered, it can automatically mute the audio output or select a pre-programmed scene to prioritise evacuation procedures and emergency announcements.
ARTICLE N° 126621
Presentation
The DBX ZC-FIRE is an interface designed to integrate a fire safety system with ZonePRO audio processors. It enables the behaviour of the audio system to be automated when a signal is received from a fire detection or alarm system, so that the sound output can be immediately adapted to an emergency situation.
The interface can be configured to mute the system or trigger a programmable scene selection when the alarm is activated. This second option allows a specific audio configuration designed for emergency situations to be recalled, depending on the installation’s requirements and the ZonePRO processor’s programming.
The trigger can be activated in two ways: via a relay in the fire safety system or directly from a control voltage. The ZC-FIRE thus provides a logical link between the safety system and the audio processing, without requiring manual intervention by the user.
Communication with the ZonePRO processor takes place via a CAT5 or CAT5E cable fitted with RJ45 connectors. The ZC-FIRE has two RJ45 connectors and can be integrated into a system using serial cabling or a parallel architecture with a ZC-BOB. In a parallel configuration, up to six controllers can be connected over a maximum distance of approximately 305 metres.
The interface can be configured to mute the system or trigger a programmable scene selection when the alarm is activated. This second option allows a specific audio configuration designed for emergency situations to be recalled, depending on the installation’s requirements and the ZonePRO processor’s programming.
The trigger can be activated in two ways: via a relay in the fire safety system or directly from a control voltage. The ZC-FIRE thus provides a logical link between the safety system and the audio processing, without requiring manual intervention by the user.
Communication with the ZonePRO processor takes place via a CAT5 or CAT5E cable fitted with RJ45 connectors. The ZC-FIRE has two RJ45 connectors and can be integrated into a system using serial cabling or a parallel architecture with a ZC-BOB. In a parallel configuration, up to six controllers can be connected over a maximum distance of approximately 305 metres.
Features
Analog / digital
Mixed
Packaging
Single unit
Other features
-
DBX ZC-FIRE
-
ZonePRO fire safety interface
-
Function: integration of a fire safety system into the audio system
-
Compatibility: DBX ZonePRO
-
Functions: system mute or programmable scene selection
-
Trigger: relay or control voltage
-
Connection to processor: RJ45
-
Number of connectors: 2 × RJ45
-
Cabling: serial or parallel with ZC-BOB
-
Recommended cable: CAT5 or CAT5E
-
Maximum distance in parallel wiring: approx. 305 m
-
Parallel wiring: up to 6 controllers with ZC-BOB
-
Nominal DC cable resistance: 28.6 Ω/305 m
-
Cable classification: VW-1 or higher
-
Identification: DIP switches
-
Certifications: UL 60065, IEC 60065, EN 55013, E60065
