DPA - 4288-DP-F-F90-MH
New
748,33 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 5 days
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Wired Microphones
DPA 4288-DP-F-F90-MH, 4288 CORE+ cardioid headset microphone, 100 mm boom, beige colour, MicroLock connector (MicroDot compatible).
ARTICLE N° 123041
Other features
-
DPA 4288-DC-F-F00-MH
-
Flex headset CORE+ 4288 Directional, 100 mm, Beige, MicroLock
-
DPA 88 capsule (identical to 4088)
-
Directional pattern : Cardioid
-
Operating principle : Pressure gradient
-
Capsule type : Pre-polarised condenser
-
Frequency response : 20 Hz - 20 kHz
-
Frequency range, ± 2 dB, near field 2-3 cm (0.8 - 1.2 in): 100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)
-
Sensitivity, nominal, ± 3 dB at 1 kHz: 6 mV / Pa; -44 dB re. 1 V / Pa
-
Equivalent noise level, A-weighted: Typ. 26 dB (A) re. 20 µPa (max.28 dB (A))
-
Equivalent noise level, ITU-R BS.468-4 : Typ. 38 dB (max.40 dB)
-
Distortion, THD <1% - CORE: 134 dB SPL RMS, 137 dB SPL peak (compared with 120 dB SPL RMS, 123 dB SPL peak for the previous version)
-
Dynamic range of the CORE version: Typ. 111 dB (compared with 97dB for the previous generation)
-
Max. SPL, THD 10%: 144 dB SPL peak
-
Nominal output impedance: From MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω
-
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter
-
Output balance principle: Balanced signal with DAD6001-BC XLR adapter
-
Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
-
Power supply (for optimum performance) : Min. 5 V to max. 50 V adapter via DPA for wireless systems
-
Current consumption : Typ. 1.5 mA (microphone). 3.5 mA with XLR adapter DAD6001-BC
-
Connector: MicroDot
-
Colour (of each component, including cable): Beige (also available in black or brown)
-
Weight: Single ear: 10 g
-
Microphone diameter: 5.4 mm
-
Microphone length: 12.7 mm
-
Cable length: 1.25 m
-
Cable diameter: 1.6 mm
-
Polarity: Positive increase in sound pressure produces positive voltage on MicroDot pin (and pin 2 on DAD6001 XLR adapter)
-
Temperature range: -40°C to 45°C (-40°F to 113°F)
-
Relative humidity (RH): Up to 90%.
