Focal - Trio11 Be (l'unité)
Sales
Lowest price over 30 days
2 987,50 €
2 654,17 €
excl VAT
-11%
including eco-part : 3,10 €
In Stock
Shippable immediately
+infos
Guarantee 3
years
Studio Monitors
Focal Trio11 Be, high-end active near/mid field monitoring speaker, 3 channels and 550W. The flagship of Series 6!
ARTICLE N° 65657
Presentation
The Focal Trio11 Be combine two monitoring speakers in one, like the Trio6 Be.
The Trio11 Be having a frequency response ranging from 30 Hz to 40 kHz (in 3-way mode), you can do without a subwoofer and your mixes will be even more precise. In FOCUS mode, switch to 2 channels (the subwoofer is muted), and thus, with a frequency response of 90 Hz to 20 kHz, you have the possibility to check the quality of your mixes on systems with a limited frequency response in the bass such as televisions, computers, automobiles, mobile speakers, etc.
The finishes are extremely careful, reflecting Focal's know-how. All cabinetmaking is developed and manufactured by Focal in its workshop located in Bourbon-Lancy.
Dedicated to both near-field and mid-field uses, this double monitoring speaker that SonoVente.com has referenced to meet the needs of the most demanding sound engineers combines extreme neutrality, stereophonic image precision and the ability to reproduce the smallest sound microdetails.
The class G amplification of the Focal Trio11 Be (bass and medium) makes it possible to achieve very high SPL levels, which is essential for working with modern music.
To use Focus mode, you must use a foot switch to plug into one of the 2 speakers (Focus input) and connect the 2 speakers together using an asymmetrical 6.35 jack-jack cable (mono).
The Trio11 Be having a frequency response ranging from 30 Hz to 40 kHz (in 3-way mode), you can do without a subwoofer and your mixes will be even more precise. In FOCUS mode, switch to 2 channels (the subwoofer is muted), and thus, with a frequency response of 90 Hz to 20 kHz, you have the possibility to check the quality of your mixes on systems with a limited frequency response in the bass such as televisions, computers, automobiles, mobile speakers, etc.
The finishes are extremely careful, reflecting Focal's know-how. All cabinetmaking is developed and manufactured by Focal in its workshop located in Bourbon-Lancy.
Dedicated to both near-field and mid-field uses, this double monitoring speaker that SonoVente.com has referenced to meet the needs of the most demanding sound engineers combines extreme neutrality, stereophonic image precision and the ability to reproduce the smallest sound microdetails.
The class G amplification of the Focal Trio11 Be (bass and medium) makes it possible to achieve very high SPL levels, which is essential for working with modern music.
To use Focus mode, you must use a foot switch to plug into one of the 2 speakers (Focus input) and connect the 2 speakers together using an asymmetrical 6.35 jack-jack cable (mono).
Other features
-
Focal Trio11 Be
-
High SPL level: 118 dB @ 1 m
-
FOCUS mode, to switch from 3-way monitor to 2-way monitor
-
Pure Beryllium inverted dome tweeter: very low directivity, linearity, dynamics
-
“W” composite sandwich membrane: sound neutrality, no distortion
-
Bass, low mid and treble settings on the rear panel: optimal acoustic integration
-
Optimization of decoupling of the midrange speaker thanks to silent blocks
-
Extremely low distortion and noise
-
Mid-high deck rotating 360° in 90° steps for horizontal or vertical use in order to optimize the performance of the monitor depending on its positioning in the room and the acoustics of the latter
-
Three internal amplifiers for a total of 550 W:
-
300 W bass, class G
-
150 W midrange, class G
-
100 W treble, class AB
-
10'' subwoofer with “W” composite sandwich membrane
-
Large front laminar port for the subwoofer
-
1" pure Beryllium inverted dome tweeter
-
Two front vents for the woofer
-
Woofer 5'' composite sandwich membrane "W" with TMD
-
Performance
-
Frequency response 3-way mode 30 Hz - 40 kHz (+/- 3 dB)
-
Frequency response 2-way mode (Focus) 90 Hz - 20 kHz (+/- 3 dB)
-
Maximum SPL level 3-way mode 118 dB (peak @ 1 m)
-
Maximum SPL level 2-way mode (Focus) 105 dB (peak @ 1 m)
-
Entries:
-
Type / Impedance: Electronic balanced / 10 KOhms
-
Connectors: XLR
-
Sensitivity: Adaptable, +4 dBu or -10 dBv
-
Power supply:
-
Mains voltage 230 V (1.6 A T fuse) - 115 V (3.5 A T fuse)
-
Connection via removable IEC power cord
-
Visualizations and controls:
-
Rear panel Input sensitivity selector (+4 dBu/-10 dBV), bass shelving (+/- 3dB from 35 to 250 Hz), treble shelving (+/- 3 dB from 4.5 to 40 kHz), Low-mid frequency EQ (+/- 3 dB at 160 Hz, Q factor = 1), FOCUS input / FOCUS output in 6.35mm jack format, unbalanced (mono)
-
Disengageable auto standby at the back of the speaker: switch enable/disable
-
Light indicator Power on Focus, clipping and security by LED on front panel
-
Transducers:
-
Subwoofer 10W96701D, 25 cm Focal speaker with “W” composite sandwich membrane
-
Midrange 5W04701, 13 cm Focal speaker with “W” composite sandwich diaphragm
-
TB872 Tweeter, 25mm Focal Tweeter with pure Beryllium inverted dome
-
Cabinetmaking:
-
Construction 21 mm and 30 mm panels with internal reinforcements
-
Finish Natural veneer cheeks Dark red ash burl, Black body
-
Dimensions with 4 rubber pads (HxLxD): 635 x 345 x 450 mm
-
Weight: 37.3 kg
Videos
Packages
You may also like
Accessories
Spotlight on
Focal, founded in 1979 in Saint-Étienne, is a renowned French brand known for its high-fidelity audio systems. The company designs and manufactures Hi-Fi speakers, headphones, and professional monitoring speakers. Focal is acclaimed for the exceptional sound quality of its products, such as the Trio6 ST6 and Solo6 ST6 speakers, as well as the Listen Pro headphones, catering to audiophiles and sound professionals, ensuring precise and immersive sound reproduction.
