Krk - Kreate 5 Scarlett Studio + Supports bas (La paire)
The KRK Kreate 5 Scarlett Studio loudspeakers, with their intense red colour, like a racing car hurtling down a high-frequency motorway, do more than just look good on your desk. Taut bass, chiselled midrange and airy highs: everything is driven by muscular bi-amplification in a rigid, well-damped cabinet. The textile dome tweeter and woven glass fibre woofer deliver up to 105dB of pure control, with a very wide stereo spread (dispersion H135° x V90°). All this is backed up by a 2-band EQ, triple connectivity (XLR, ∅6.35 mm jack, RCA) and Bluetooth 5.3 TWS ready to stream your mix. Bonus: Plugger Studio MS2 Mini stands, compact, solid and adjustable to the millimetre. In short, the pack that hits the nail on the head, with no false connections.
Composition of the package
Presentation
And it's not all gum on the box: vinyl-covered MDF cabinet, reinforced polystyrene front panel, multi-voltage power supply. Whether you're working in the studio or in a home setup, they'll hold up. They can handle up to 105dB SPL without flinching, and their wide dispersion means you can work comfortably without being right in the centre. They're tolerant... but precise.
The Plugger Studio MS2 Mini stands, on the other hand, are reliable sidekicks. Height-adjustable from 230 to 290 mm, with safety pin, anti-slip plate and sturdy steel: they ensure that your set-up is meticulous. Whether you're in monitoring, Hi-Fi or Sunday cinema mode, they stabilise your speakers without wobbling (up to 25 kg per tray, no less). Bonus? A sober look that goes everywhere, even between two green plants.
Other features
-
Monitor speaker + stand package, including :
-
.
-
KRK Kreate 5 Scarlett Studio (pair)
-
Pack of 2 active monitor speakers
-
Series: Kreate
-
Colour: Scarlett (deep red)
-
2-way Bass Reflex system
-
Bi-amplification (Bass: Class D / Treble: Class A/B)
-
Total power: 60 W
-
LF amplifier power: 45 W
-
HF amplifier power: 15 W
-
Maximum SPL: 105 dB
-
Woofer: ∅5" (∅127 mm), woven glass fibre cone, ferrite magnet
-
Tweeter: ∅1" (∅25.4 mm), textile dome, neodymium magnet
-
Frequency response: 58 Hz ⭢ 40 kHz
-
Crossover frequency: 2.56 kHz
-
Signal-to-noise ratio: > 94 dB
-
Dispersion : H135° x V90°
-
Controls: Volume
-
2-band EQ: LF ±2 dB / HF -2 ; +1 dB
-
Bluetooth 5.3 Classic TWS A2DP connectivity
-
Input connectors: XLR + Jack ∅6,35 mm + RCA
-
Cabinet construction: PVC vinyl-coated MDF
-
Front panel: reinforced high-resistance polystyrene
-
Power supply: 100 - 240 V AC, 50/60 Hz
-
Dimensions: 259 x 229 x 185 mm
-
Weight: 4.3 kg
-
+
-
Plugger Studio MS2 Mini (pair)
-
Set of 2 stands for monitoring speakers
-
For monitoring, hi-fi or home cinema listening
-
Adjustable heights: 230 ⭢ 290 mm
-
Safety pin
-
Material: steel
-
Black finish
-
Top dimensions : 230 x 230 mm
-
Base dimensions: 250 x 250 mm
-
Maximum weight: 25 kg
-
Weight per piece : 4.5 kg
To find out more...
To get the most out of your setup, remember to use the right audio cables: XLR, TRS ∅6.35 mm or RCA jacks, depending on your configuration. You can also add a studio microphone for vocals, or an external audio interface to get the most out of these speakers. As for maintenance, a soft cloth is all you need to keep the surfaces spotless... unless you're working with chips. That's a different matter.
You may also like
Spotlight on
Beginners or professionals, the famous monitoring speakers with yellow drivers have won over the most iconic studios and artists: Eric Clapton, Sting, Van Halen... Whether it's the Rokit with integrated DSP, the V series with Kevlar tweeter or the new subwoofers, you'll never be disappointed with your choice!
