M AUDIO - BX8 D3 (La Pièce)
These models in stock may be of interest to you:
The M-Audio BX8 D3 is an 8-inch, bi-amplified (80W bass, 70W highs) active monitor speaker with a frequency response of 37 Hz to 22 kHz. It features a Kevlar cone for defined bass, a natural silk dome tweeter for clear highs, and a three-position acoustic space control. With balanced XLR and TRS inputs, an optimized rear port, and an LED indicator for placement, it is ideal for professional studio environments.
Presentation
Thus, the BX8 D3 goes from a power of 130 to 150 Watts with a frequency response of 37 Hz to 22 kHz, thanks to two class A / B amplifiers powering an 8 "Kevlar woofer (80W) and a 1.25 "silk dome tweeter (70W). A 2 kHz crossover ensures that the correct frequencies are transmitted to each speaker.
Also find the addition of an original waveguide on the tweeter of the BX8 D3, thus promoting precise sound dispersion and eliminating unwanted high frequencies, a rear vent has also been developed to minimize air turbulence and distortion while offering a more extended response in the bass, and finally, the sweet pot location indicator, the latter symbolizing the precise location where stereo projection is optimal.
Place the BX8 D3 monitor on the acoustic foam pad provided to decouple it from your table or feet, which reduces unwanted vibrations in the low frequencies.
The quality of the M-Audio BX8D3 speakers and the excellence of the transducers promote the precision and reproduction of crucial details and nuances essential to the realization of your mixes! In short, the return of the best, even better!
Other features
-
M-Audio BX8 D3 (unit)
-
8" active 2-way 150W reference monitoring speaker
-
Powerful class A/B bi-amplification
-
8" Kevlar cone low-frequency driver for rich and defined bass
-
1.25" natural silk dome high-frequency driver delivering superb transient details
-
New tweeter waveguide optimized for a fine sound image
-
3-position acoustic space control for adapting the bass according to the mixing environment (flat / -2dB / -4dB)
-
Rear port optimized for extended low-frequency response
-
Magnetic shielding to eliminate interference with other electronic equipment
-
Balanced XLR and 6.35 mm TRS jack inputs
-
Rear volume control
-
LED indicator to determine the ideal position listening
-
Technical specifications:
-
Frequency response: 37 Hz to 22 kHz
-
Crossover frequency: 1.9 kHz
-
Low frequency amplification power: 80 watts
-
High frequency amplification power: 70 watts
-
Signal-to-noise ratio (dynamic range): > 110 dB (typical A-weighted)
-
Polarity: a positive signal on the + input causes the low frequency cone to move outwards
-
Input impedance: 20kOhms (balanced), 10 kOhms (unbalanced)
-
Input sensitivity: a pink noise of 85mV at the input produces an SPL output level of 96 dBA at 1 meter (volume control at maximum)
-
Power supply: factory programmed for 115V 50/60 Hz or 230V 50/60 Hz
-
Protections : RF interference, output current limitation, overheating, power off/on, subsonic filter, external fuse
-
High acoustic efficiency MDF enclosure with vinyl veneer
-
Dimensions (enclosure): 250 x 302 x 384 mm
-
Weight: 10.5 kg
-
Sold individually
Videos
User reviews Studio Monitors
BX8 D3 (La Pièce) M AUDIO
/5
12 User reviews
Accessories
Spotlight on
Founded in 1980 in the U.S., the company known then as Midiman, and now as M-Audio, has become a leading manufacturer of controllers, master keyboards and audio interfaces, right down to monitor speakers. Acquired in 2012 by InMusic, the company that also owns Numark, Alesis and Akai Professional, among others, M-Audio continues to develop new products aimed at providing musicians with powerful, yet affordable tools. The company's superb STUDIOPHILE BX monitor speakers, KEYSTATION, OXYGEN, OXYGEN PRO and HAMMER MIDI keyboards, as well as M-TRACK and AIR sound cards, are just a few of the new products M-Audio has developed.
