Sound Processing System

Module size 500 for interfacing guitar effects pedals with your recording equipment. the EXTC asymétrise the signal and converts it into a high-impedance signal, where you can insert your effects pedals. The Radial EXTC is probably one of the most innovative effects that was ever made. It suggests new horizons by raising the reamping to another level.

ARTICLE N° 54512
  • Radial Engineering Guitar Effects Interface EXTC
  • 500 Series
  • module for interfacing guitar effects pedals with your recording equipment.
  • Circuit Type Solid state with transformer coupled to the loop
  • effects Need to supply 72mA, +/- 16VDC
  • Output gain 12dB - Send & Receive 6dB max - min send / receive max 0dB - Send & Receive the
  • center 20Hz ~ 20kHz ± 1.5dB bandwidth Treaty; 20Hz ~ 10kHz +/- 3.5dB (8dB @ 20kHz)
  • THD + N> 0.005% Output 0dB treated:> 0.002% Output 0dB
  • Distortion> 0.003% 0dBu input - <0.02% input 0dBu
  • Level max + 26dBu processed input: + 20dBu
  • effects Loop - SEND asymmetric Jack - RECEIVE Jack asymmetric
  • input Impedance 15k Ohms - 200 Ohms output
  • I / O line I / O XLR male / female symmetrical
  • headroom Output + 25dBu
  • inside the module, there is a discrete buffer in class a, and the transmission is transformer isolated to eliminate ground loops.
The EXTC Radial is a module 500 series that allows you to incorporate guitar effects in the field of professional audio recording.
Imagine ... add grain to a vocal track, the wah on a bass drum, perhaps the flange on a violin, etc ... The EXTC is a creative / inventive tool that exacerbates your esoteric, ready to create new sounds that will make your recordings stand out from the 'herd'.
Super easy to use: Send a line-level signal to your recording system. The EXTC 'désymétrise' the signal and converts it into high impedance where guitar pedals can be inserted at will. Jacks on the front allow easy insertions 'send' and 'return'.

Spotlight on