Radial - SGI Stereo RX (Récepteur)
250 €
excl VAT
Out of stock
Contact us for delivery times
Guarantee 3
years
Anais
Tristan
Do you need help?
DI Box
The SGI Stereo RX is the passive receiver in Radial Engineering's SGI Stereo system. It receives an analogue stereo signal transmitted over a Cat5 or Cat6 cable and outputs it to two amplifiers while preserving the integrity of the original sound.
ARTICLE N° 118359
Presentation
The Radial Engineering SGI Stereo RX is designed to work in tandem with the SGI Stereo TX transmitter to solve the constraints associated with long distances between a pedalboard and amplifiers. When amplifiers are placed off-stage, in an isolated booth or in another room, the RX allows the stereo signal to be recovered without degradation, even over distances of up to 100 metres.
Entirely passive, the SGI Stereo RX requires no external power supply. It receives the balanced analogue signal via a standard Ethernet cable and converts it back into unbalanced instrument signals suitable for input to guitar amplifiers or similar amplification systems. This conversion is carried out using top-of-the-range Jensen transformers, which guarantee a stable frequency response, low distortion and excellent isolation from ground loops.
The RX incorporates practical tools for complex stereo configurations. A 180° polarity inverter on the left channel allows you to quickly correct phase problems between two amplifiers. Each channel also has its own ground lift switch, making it easy to eliminate hum in harsh electrical environments.
The SGI Stereo RX's robust design and lockable, etherCON-compatible RJ45 connector make it equally at home on large stages or in professional studios, providing a reliable, seamless solution for remote stereo installations.
Entirely passive, the SGI Stereo RX requires no external power supply. It receives the balanced analogue signal via a standard Ethernet cable and converts it back into unbalanced instrument signals suitable for input to guitar amplifiers or similar amplification systems. This conversion is carried out using top-of-the-range Jensen transformers, which guarantee a stable frequency response, low distortion and excellent isolation from ground loops.
The RX incorporates practical tools for complex stereo configurations. A 180° polarity inverter on the left channel allows you to quickly correct phase problems between two amplifiers. Each channel also has its own ground lift switch, making it easy to eliminate hum in harsh electrical environments.
The SGI Stereo RX's robust design and lockable, etherCON-compatible RJ45 connector make it equally at home on large stages or in professional studios, providing a reliable, seamless solution for remote stereo installations.
Features
Active / passive
Active and passive
Input channels
2
Weight
500 g
Packaging
Single unit
Other features
-
Radial Engineering SGI Stereo TX
-
Stereo analogue transmission transmitter for instruments
-
Architecture: active SGI Stereo TX transmitter, used with a passive SGI Stereo RX receiver
-
Transmission: balanced analogue signal via Cat5 or Cat6 Ethernet cable
-
Maximum distance: up to 100 m (300 ft)
-
Inputs: 2 x 6.35 mm unbalanced high-impedance Left and Right jacks
-
Thru outputs: 2 x unbalanced 6.35 mm jack with automatic summing to mono if only one output is used
-
TX to RX connection: RJ45 compatible with Neutrik etherCON lockable connectors
-
Transformers: Jensen premium, 2 transformers built into the TX
-
Frequency response: 20 Hz to 18 kHz ±1 dB
-
Total harmonic distortion: less than 0.0052% at -20 dBu, 1 kHz
-
Signal-to-noise ratio: greater than 91 dB
-
Dynamic range: greater than 103.4 dB
-
Input impedance: 200 kΩ
-
Output impedance: 1.3 kΩ
-
Power supply: 9 to 18 V DC, positive or negative centre polarity accepted
-
Power supply: 15 V DC mains adaptor
-
Dimensions: 70 x 108 x 44 mm
-
Weight: 500 g
