Universal Audio - Apollo e2m
New
357,50 €
excl VAT
In Stock
Usually ships within 4 days
+infos
Guarantee 3
years
Anais
Tristan
Do you need help?
The Apollo e2m is a Dante network audio interface designed to route audio connections and monitoring directly to the stage or in the studio. Powered via PoE, it features two line inputs, two line outputs and two headphone outputs with centralised level control.
ARTICLE N° 126520
Presentation
The Apollo e2m is a compact monitoring station designed for Dante network audio installations. It provides analogue audio connections and monitoring control close to musicians or technicians, whilst minimising cabling thanks to its Power over Ethernet supply.
Its two balanced line inputs via 6.35 mm jacks allow you to connect various pieces of equipment such as synthesisers, drum machines, amp modellers, players or other analogue sources. The signals are converted and can be integrated directly into the Dante or AES67 network.
For monitoring, the Apollo e2m features two balanced line outputs as well as two stereo headphone outputs, available as 6.35 mm jacks and 3.5 mm mini-jacks. The line and headphone outputs share the same stereo signal and are controlled by a single volume knob located on the top of the unit. Two separate mute controls allow the line and headphone outputs to be muted independently.
The 802.3af PoE power supply allows the Apollo e2m to be installed wherever monitoring is required, without the need for an additional mains power supply. Its integrated 5/8" thread also allows it to be mounted on a microphone stand or a clamp adapter.
When paired with the Apollo x16D, the e2m provides a particularly flexible personal monitoring solution. The outputs can receive customised cue mixes, whilst the two line inputs can be integrated with the system’s Dante channels. The Apollo e2m can also operate standalone on a Dante network, without requiring an Apollo x16D.
Its two balanced line inputs via 6.35 mm jacks allow you to connect various pieces of equipment such as synthesisers, drum machines, amp modellers, players or other analogue sources. The signals are converted and can be integrated directly into the Dante or AES67 network.
For monitoring, the Apollo e2m features two balanced line outputs as well as two stereo headphone outputs, available as 6.35 mm jacks and 3.5 mm mini-jacks. The line and headphone outputs share the same stereo signal and are controlled by a single volume knob located on the top of the unit. Two separate mute controls allow the line and headphone outputs to be muted independently.
The 802.3af PoE power supply allows the Apollo e2m to be installed wherever monitoring is required, without the need for an additional mains power supply. Its integrated 5/8" thread also allows it to be mounted on a microphone stand or a clamp adapter.
When paired with the Apollo x16D, the e2m provides a particularly flexible personal monitoring solution. The outputs can receive customised cue mixes, whilst the two line inputs can be integrated with the system’s Dante channels. The Apollo e2m can also operate standalone on a Dante network, without requiring an Apollo x16D.
Other features
-
Universal Audio Apollo e2m
-
Dante-enabled stereo monitoring and I/O interface
-
Number of channels: 2 inputs / 2 simultaneous outputs
-
Network communication: Dante / AES67
-
Network connection: 1 x 100 Mbps RJ45 Ethernet
-
Power supply: PoE 802.3af
-
Power consumption: 5.2 W typical, 7.3 W maximum
-
Analogue inputs: 2 x balanced 6.35 mm TRS jacks
-
Analogue outputs: 2 x balanced 6.35 mm TRS jacks
-
Headphone outputs: 1 x 6.35 mm TRS jack + 1 x 3.5 mm TRS mini-jack
-
Volume control: shared potentiometer for line and headphone outputs
-
Controls: Independent mute for line and headphone outputs
-
Maximum input level: +18 dBu
-
Input impedance: 10 kΩ
-
Maximum output level: +14 dBu
-
Output impedance: 100 Ω
-
Volume adjustment range: 90 dB
-
Maximum headphone power: up to 300 mW
-
A/D conversion: 2 channels
-
D/A conversion: 2 channels
-
Resolution: 24-bit
-
Sampling rates: 44.1 / 48 / 88.2 / 96 kHz
-
AES67 compatibility: Yes, at 48 kHz only
-
Analogue-to-network latency: < 0.2 ms
-
Dante network latency: 1 / 2 / 5 ms
-
Line input frequency response: 20 Hz – 20 kHz, ±0.03 dB
-
Line output frequency response: 20 Hz – 20 kHz, ±0.05 dB
-
Headphone output frequency response: 20 Hz – 20 kHz, ±0.05 dB
-
Line input dynamic range: 120 dB A-weighted
-
Line output dynamic range: 120 dB A-weighted
-
Headphone output dynamic range: 119 dB A-weighted
-
THD+N for line inputs: -115 dB, 0.00018 %
-
THD+N for line outputs: -109 dB, 0.00035 %
-
THD+N (headphone outputs): -112 dB, 0.00025 %
-
Maximum headphone output level: up to +16.7 dBu depending on impedance
-
Headphone connections: 6.35 mm and 3.5 mm outputs in parallel
-
Dante routing: 2 TX input channels + 2 RX output channels
-
Routing: Dante Controller and UAD Console with Apollo x16D
-
Compatibility: Apollo x16D, Apollo e1x
-
Mounting: flat surface or microphone stand / 5/8" clamp adapter
-
Operating temperature: 0 °C to 40 °C
-
Dimensions: 120 × 48 × 117.4 mm
-
Weight: 493 g
You may also like
Spotlight on
For over 50 years, Universal Audio has been an industry leader in DSP audio modeling and vintage analog technology. The American manufacturer has released groundbreaking products such as the LA-2A compressor and the 610 tube mic preamp which have been used to record artists as diverse as the Beach Boys and Van Halen.
Since the 2000s, Universal Audio has been faithfully reproducing classic analog recording equipment and designing new digital recording tools in keeping with the sound and spirit of vintage analog technology. Best-sellers include the Apollo interface, UAD-2 Satellite, UAD plug-ins, UADFX pedals and the OX Amp Top Box.
