Aguilar - TLC Compressor V2
249,17 €
excl VAT
including eco-part : 0,90 €
Resupply
Arrival expected on Jun 30, 2026
Guarantee 3
years
Fred
Eric
Do you need help?
Bass Effects
Effects pedal The TLC Compressor is designed to give musicians the ability to control their dynamics in a flexible and musical way, making it an invaluable tool for recording and live performance.
ARTICLE N° 89166
Presentation
The Trans Linear Control (TLC) circuit achieves unprecedented levels of performance usually found only in expensive studio compressors.
The TLC Compressor V2 features 4 potentiometers to provide a complete set of important settings.
With a wide range of attack times and variable threshold and slope levels, you'll be able to set the amount and type of compression you prefer.
type of compression you prefer.
The TLC Compressor V2 features 4 potentiometers to provide a complete set of important settings.
With a wide range of attack times and variable threshold and slope levels, you'll be able to set the amount and type of compression you prefer.
type of compression you prefer.
Other features
-
Aguilar TLC Compressor V2
-
Effect pedal for bass
-
Type : Compressor
-
Technology : Analogue
-
Settings : level, threshold, attack, slope
-
Level control : from minus infinity to -3dBu
-
Threshold control : from -30 to -10dBu
-
Attack control: variable from 10ms to 100ms
-
Slope control: variable from 2:1 to infinity
-
Low distortion (<0.2%)
-
Gig-saver bypass (the signal passes through even if your battery is discharged)
-
Connectors: 2x Ø6.35 mm jacks
-
Power supply: 9 V battery, or mains adapter sold separately
-
Heavy-duty steel chassis
To find out more...
- Level: controls the output volume. Used to adjust volume and compensation gain.
- Threshold: sets the input level at which compression begins.
- Attack: sets the time before compression begins after a note has been played.
- Slope: controls the compression ratio, or slope.
- Engage: toggles between on and off.
- Threshold: sets the input level at which compression begins.
- Attack: sets the time before compression begins after a note has been played.
- Slope: controls the compression ratio, or slope.
- Engage: toggles between on and off.
