Audient - Bundlle ORIA Mini + SoundID Reference Spk/HP
New
332,50 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Jessie
Louis
Do you need help?
Measurement Microphone
The Audient ORIA Mini + Sonarworks SoundID Reference Speaker & Headphone & ORIA Mini Add-on bundle offers a comprehensive solution for professional monitoring and room correction. It allows you to optimise both speakers and headphones to achieve a more neutral, accurate and reliable listening experience for mixing, mastering and immersive audio production.
ARTICLE N° 123839
Presentation
The Audient ORIA Mini + Sonarworks SoundID Reference Speaker & Headphone & ORIA Mini Add-on bundle offers a turnkey solution for professionals looking to significantly improve the accuracy of their listening environment. By combining the ORIA Mini monitoring interface with the reference calibration tools developed by Sonarworks, this bundle reduces the influence of room acoustics and the specific characteristics of the speaker systems.
At the heart of the bundle, the Audient ORIA Mini handles monitoring with professional-grade audio quality suited to music production, mixing, mastering and immersive creation. Its native integration with Sonarworks allows you to directly benefit from correction profiles created from precise acoustic measurements of the room.
The SoundID Reference Speaker & Headphone software provides all the tools needed to calibrate both monitor speakers and headphones. Using the included measurement module, it analyses the system’s acoustic response and applies a correction designed to achieve a more neutral and balanced sound. This enables users to make more reliable decisions during mixing and minimise unpleasant surprises when listening on other systems.
The ORIA Mini Room Correction Add-on unlocks full integration between SoundID Reference and the ORIA Mini. This synergy allows you to fully utilise the correction capabilities directly within the Audient ecosystem, offering a particularly efficient workflow for modern studios.
At the heart of the bundle, the Audient ORIA Mini handles monitoring with professional-grade audio quality suited to music production, mixing, mastering and immersive creation. Its native integration with Sonarworks allows you to directly benefit from correction profiles created from precise acoustic measurements of the room.
The SoundID Reference Speaker & Headphone software provides all the tools needed to calibrate both monitor speakers and headphones. Using the included measurement module, it analyses the system’s acoustic response and applies a correction designed to achieve a more neutral and balanced sound. This enables users to make more reliable decisions during mixing and minimise unpleasant surprises when listening on other systems.
The ORIA Mini Room Correction Add-on unlocks full integration between SoundID Reference and the ORIA Mini. This synergy allows you to fully utilise the correction capabilities directly within the Audient ecosystem, offering a particularly efficient workflow for modern studios.
Features
Power supply
Via USB bus
Packaging
Single unit
Accessories included
USB Cable
Connectors
Jack female Stéréo, null
Other features
-
Audient ORIA Mini
-
Audio interface and SoundID Ref Measurement Mic bundle
-
Acoustic calibration DSP processor
-
Partnership: Sonarworks x Audient
-
Series: ORIA
-
Sampling rate: 24-bit / 96 kHz
-
Dynamic range: 127 dB
-
Converters: 32-bit
-
Target profiles: Flat, Dolby Music, headphone simulation, car, smartphone
-
Integrated technology: SoundID Reference (Sonarworks)
-
Room calibration: EQ, delay, bass management, trim
-
Performance: ultra-low latency, no CPU required
-
Remote control: Stream Deck & iPad compatible
-
Internal DSP: storage for 4 calibration profiles
-
Supports systems up to 2.1
-
Indicators: signal, peak, active profiles
-
Compatibility: macOS & Windows
-
Analogue input: 6.35 mm TRS jack
-
Digital input: 1x S/PDIF
-
Analogue output: 2x 6.35 mm TRS jack
-
Sub output: 6.35 mm TRS jack
-
Computer connection: USB-C
-
Power supply: Via USB bus
-
Included accessories: USB-C cable
-
Sonarworks SoundID Ref Measurement Mic
-
Measurement microphone
-
Requires +48V phantom power
-
Pre-polarised electret condenser capsule
-
Frequency response: 20 – 20,000 Hz with measurement protocol
-
Polar pattern: Omnidirectional
-
Sensitivity: 14 mV/Pa
-
Self-noise: 24 dB
-
Signal-to-noise ratio: 70 dB
-
Dynamic range: 106 dB
-
Maximum sound pressure level: 132 dB
-
Requires 48V phantom power
-
3-pin XLR connection
-
Calibration file for off-axis measurement at 30° in native Sonarworks format for use with SoundID Reference software
-
Calibration file for on-axis measurement at 0° in TXT format
-
Sonarworks SoundID Reference Speaker & Headphone & ORIA Mini Add-on
-
Downloadable licence: you will receive your serial number by email, along with the invoice
-
Manufacturer’s reference: SW5SD-ORIAMINI
-
Software package for calibrating speakers, headphones and a measurement microphone
-
Correction of the frequency response of studio monitors and headphones for the most linear reproduction possible
-
Enables better evaluation of recordings and mixes
-
Room analysis and automatic calculation of room size using numerous measurement points
-
Audio calibration engine for the most precise adjustment possible
-
A large number of speaker profiles can be stored
-
Supplied with calibration curves for over 280 different headphone models
-
Target curves can be individually adjusted in real time
-
Translation Check simulates over 20 different devices and device types for precise implementation during mixing
-
Three selectable filter modes: Zero Latency, Mixed and Linear Phase to optimise filter quality and latency for different monitoring situations
-
Additional settings for Mono, Dry/Wet and Safe Headroom
-
Available only in the app: MIDI mapping for various parameters and user presets for predefined output configurations
-
Integration with Audient ORIA Mini (not included, sold separately)
-
Unlocks SoundID features within the ORIA Mini
-
Plug-in formats: AU (Audio Unit), VST, AAX
-
Suitable for: Mixing, Mastering, Music production, Post-production, Immersive audio
-
Can be activated on up to 3 installations
-
System requirements:
-
Mac: macOS 10.14 Mojave or later
-
PC: Windows 10 (64-bit) or later
-
Internet connection (offline installation not possible)
To find out more...
When Sonarworks and Audient joined forces, the idea wasn’t simply to add yet another gadget to the market. Their aim was to translate the SoundID Reference calibration—already adopted in thousands of studios—directly into robust, standalone hardware. The ORIA series was therefore created as a clear response to the limitations faced by engineers who were constantly juggling software.
This partnership has produced a product designed to last and integrate into any control room. You’ll install the ORIA Mini at the heart of your setup and benefit from hardware-based acoustic correction, whilst your CPU remains free for your favourite plugins. Properly setting up a room’s sound is no longer a never-ending struggle, but a smooth, repeatable process that you’ll find identical in your home studio or professional space.
To get the most out of this unit, consider using high-quality balanced cables and perhaps a Stream Deck controller to switch profiles on the fly. High-end monitor speakers and a calibrated subwoofer will complete the setup, ensuring your mix sounds spot-on across any platform. In short, your studio will take on a much more coherent and enjoyable feel.
This partnership has produced a product designed to last and integrate into any control room. You’ll install the ORIA Mini at the heart of your setup and benefit from hardware-based acoustic correction, whilst your CPU remains free for your favourite plugins. Properly setting up a room’s sound is no longer a never-ending struggle, but a smooth, repeatable process that you’ll find identical in your home studio or professional space.
To get the most out of this unit, consider using high-quality balanced cables and perhaps a Stream Deck controller to switch profiles on the fly. High-end monitor speakers and a calibrated subwoofer will complete the setup, ensuring your mix sounds spot-on across any platform. In short, your studio will take on a much more coherent and enjoyable feel.
