Audio Technica - PRO61
This product is no longer available for sale
These models in stock might interest you:
68,33 €
with eco participation: 0,50 €
Warranty 3 years
Jessie
Louis
Need help ?
Wired Microphones
Hypercardioid Dynamic Microphone with quality Audio Technica, a Must for money!
ARTICLE N° 22259
Specifications
-
Microphone Type Dynamic
-
Hypercardioid
-
Frequency response: 70-16 000 Hz
-
Output level: -55 dB (1.7 mV) ref 1V / Pa *
-
Impedance: 300 Ohm
-
Weight (without cable and accessories) 335 g
-
Dimensions: Length 192.0 mm (7.56 "),
-
head diameter 52.6 mm (2.07 ")
-
Output connector: type Integral 3-pin XLR M
-
Cable 4.5 m (15.0 ') with an XLRF-type connector at microphone end and an XLRM-type connector at the other end.
-
Supplied Accessories AT8470 Quiet-Flex ™ clamp for threaded 5/8 "-27; thread adapter for 5/8" -27 to 3/8 "-16; soft protective pouch
-
Vocal Microphone Pro Series is first class provides excellent gain before feedback and outstanding stage presence
-
Magnet Neodymium Hi-ENERGY® for improved output and transient response
-
Extended frequency response for optimal vocal reproduction
-
Spherical screen at two levels reducing wind noise and "popping" in close
-
Contacts of gold-plated XLRM-type connectors, corrosion-resistant
-
Integrated anti-shock suspension for superior handling noise mitigation
-
Robust all-metal body
-
Hypercardioid for better isolation of the sound source and a reduction of the sound side and rear
Presentation
Pro Series The range is wide enough to meet all sound requirements, meet the challenges of its decision-complicated and enter every budget.
With the ultimate electronics and a very clear, hands microphones or dedicated Series Pro range have earned the reputation of being very good sonic quality and most durable in its class.
With the ultimate electronics and a very clear, hands microphones or dedicated Series Pro range have earned the reputation of being very good sonic quality and most durable in its class.
Information
Color
Black
To go further...
The output of the microphone is symmetrical low impedance, XLR
male, 3 pins. The signal is symmetrical between pins 2 and 3,
the hot spot is two (the positive voltage on the hot spot
is generated by a positive acoustic pressure on the capsule).
Ground (shield) is on pin 1.
Connector Type Ground Audio "+" Audio "-"
XLR Pin 1 Pin 2 Pin 3
1/4 "" TRS "Sleeve Tip Ring
1/4 "sleeve end sleeve
To avoid phase cancellation and poor sound
quality, all mic cables must be connected so
consistently: Pin 1-Pin 1, etc. To obtain an entry
micro high-impedance (Hi-Z), connect a cable
balanced Lo-Z Hi-Z a suitable transformer (A-T or CP8201
equivalent) and connect the transformer to the unit's input
audio.
When the PRO 61 is used in combination with an enclosure for
monitoring scene, the speaker should be located 135 ° off-axis
(45 ° to the reported rear of the microphone). This location,
associated with the uniform hypercardioid directivity of the microphone,
can further reduce the risk of unwanted feedback.
Make sure that no foreign particle enters the
windscreen. An accumulation of iron filings or steel
on the diaphragm and / or foreign bodies in the meshes of the
windscreen can degrade performance.
male, 3 pins. The signal is symmetrical between pins 2 and 3,
the hot spot is two (the positive voltage on the hot spot
is generated by a positive acoustic pressure on the capsule).
Ground (shield) is on pin 1.
Connector Type Ground Audio "+" Audio "-"
XLR Pin 1 Pin 2 Pin 3
1/4 "" TRS "Sleeve Tip Ring
1/4 "sleeve end sleeve
To avoid phase cancellation and poor sound
quality, all mic cables must be connected so
consistently: Pin 1-Pin 1, etc. To obtain an entry
micro high-impedance (Hi-Z), connect a cable
balanced Lo-Z Hi-Z a suitable transformer (A-T or CP8201
equivalent) and connect the transformer to the unit's input
audio.
When the PRO 61 is used in combination with an enclosure for
monitoring scene, the speaker should be located 135 ° off-axis
(45 ° to the reported rear of the microphone). This location,
associated with the uniform hypercardioid directivity of the microphone,
can further reduce the risk of unwanted feedback.
Make sure that no foreign particle enters the
windscreen. An accumulation of iron filings or steel
on the diaphragm and / or foreign bodies in the meshes of the
windscreen can degrade performance.
User's advice
User's advice Wired Microphones
PRO61 Audio Technica
/5
1 User's advice
YANNICK K
18/09/2018
5
/5
Purchase Checked
Produit déjà utilisé auparavant, donne toute satisfaction en concert
0
0
report
Audio Technica - PRO61
Audio Technica - PRO61
68,33 €
with eco participation: 0,50 €
Warranty 3 years
Jessie
Louis
Need help ?
Spotlight on
Founded in 1962, Japan's Audio-Technica is a leading manufacturer of AT4033, AT4041 and Artist Elite studio and stage microphones, AT2020 USB+ podcast microphones, professional wireless systems, ATH-M series headphones, AT-LP140XP turntables and DJ accessories. Developments such as Uniguard's anti-RFI technology, which protects microphones from WiFi, Bluetooth and other modern sources of radio interference, demonstrate their commitment to providing musicians and engineers with the high-quality sound they've come to expect.
Similar Products
Tops of the brand
