B&C Speakers - 12FW88 8 Ohm
165 €
excl VAT
including eco-part : 0,90 €
In Stock
Usually ships within 15 days
+infos
Guarantee 3
years
Speaker driver
B&C Speakers 12FW88 8 Ohm: a compact, high-performance 12" woofer with an 88mm voice coil and 1400W power handling capability. Ideal for two-way applications, it combines high output, extended response and low distortion.
ARTICLE N° 105004
Presentation
The 12FW88 8 Ohm from B&C Speakers is part of a generation of loudspeakers designed to offer even more possibilities in a compact package.
This is a 12-inch model, designed for two-way configurations where low-midrange and midrange performance must not be compromised.
This woofer is based on an 88mm aluminium voice coil, a generous diameter that provides better heat dissipation and power handling, with 700W AES on tap.
Efficiency is also high, with a sensitivity of 97 dB, a guarantee of appreciable effectiveness even with moderate power.
At the rear is a compact but robust high-density ferrite magnet, complemented by an aluminium demodulation ring to limit distortion in the mid-range frequencies.
The mechanical design is equally meticulous: triple suspension, double silicone spider, and a membrane treated on the surface to resist humidity (WP Waterproof Front Side treatment).
In terms of frequency response, the 12FW88 covers a range from 50 to 3000 Hz, making it a good candidate for the low-midrange or as the main woofer in a two-way speaker. It's also designed to take a beating thanks to an 8 mm Xmax, perfectly managed thanks to the ventilated motor design.
All this is integrated into a robust chassis, optimised to limit the volume occupied internally, with a recommended volume of around 40 dm³, tuned to 65 Hz.
This is a 12-inch model, designed for two-way configurations where low-midrange and midrange performance must not be compromised.
This woofer is based on an 88mm aluminium voice coil, a generous diameter that provides better heat dissipation and power handling, with 700W AES on tap.
Efficiency is also high, with a sensitivity of 97 dB, a guarantee of appreciable effectiveness even with moderate power.
At the rear is a compact but robust high-density ferrite magnet, complemented by an aluminium demodulation ring to limit distortion in the mid-range frequencies.
The mechanical design is equally meticulous: triple suspension, double silicone spider, and a membrane treated on the surface to resist humidity (WP Waterproof Front Side treatment).
In terms of frequency response, the 12FW88 covers a range from 50 to 3000 Hz, making it a good candidate for the low-midrange or as the main woofer in a two-way speaker. It's also designed to take a beating thanks to an 8 mm Xmax, perfectly managed thanks to the ventilated motor design.
All this is integrated into a robust chassis, optimised to limit the volume occupied internally, with a recommended volume of around 40 dm³, tuned to 65 Hz.
Other features
-
B&C Speakers 12FW88 8 Ohm
-
Cone driver
-
Nominal diameter: 320 mm (12")
-
Nominal impedance: 8 ohm
-
AES power handling: 700 W
-
Program power: 1400 W
-
Sensitivity (1W/1m): 97 dB
-
Useful bandwidth: 50 Hz - 3000 Hz
-
Coil diameter: 88 mm (3.5")
-
Coil wire type: Aluminium
-
Coil support: Fibreglass
-
Winding depth: 21.5 mm
-
Air gap depth: 11 mm
-
Magnet material : Ferrite
-
Flux density: 1.04 T
-
Suspension shape: Triple roll
-
Spider type : Double silicone
-
Membrane treatment: WP Waterproof (front)
-
Demodulation ring: Aluminium
-
Resonance frequency (Fs): 53 Hz
-
Qts : 0,33
-
Qes / Qms: 0.35 / 7.7
-
Vas: 45.7 dm³
-
Xmax linear: ±8 mm
-
Emissive surface area (Sd): 531 cm2
-
Force factor (BL): 19.5 T-m
-
Recommended volume: 40 dm³
-
Recommended tuning frequency: 65 Hz
-
Outside diameter: 315 mm
-
Flush-mounted diameter: 285 mm
-
Mounting circle diameter: 298 mm
-
Total depth: 145 mm
-
Front panel thickness: 12 mm
-
Volume occupied by loudspeaker: 2.5 dm³
-
Net weight: 8.25 kg
-
Weight with packaging: 9.15 kg
Additional documents
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
