B&C Speakers - 320K/C-A 8 Ohm
101,67 €
excl VAT
In Stock
Usually ships within 15 days
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Speaker driver
The B&C Speakers 320K/C-A 8 Ohm is a 12" full-range loudspeaker offering high sensitivity and extended response up to 16 kHz. It is aimed at professional systems looking for a simple, coherent, high-performance solution for full-range broadcasting or high-performance compact loudspeakers.
ARTICLE N° 117903
Presentation
The 320K/C-A 8 Ohm is a full-range loudspeaker developed by B&C Speakers to meet the needs of professional PA systems requiring extended reproduction over a wide frequency range, without the need for complex multi-way architecture. Thanks to its full-range design, it can cover the low, mid and high frequencies in compact, efficient loudspeakers.
With a sensitivity of 101 dB, this transducer boasts excellent efficiency, making it an appropriate choice for systems with high acoustic pressure operating at moderate power levels. Its bandwidth of 80 Hz to 16 kHz ensures full, intelligible reproduction, suitable for vocal, musical or instrumental broadcast applications, particularly in portable loudspeakers, stage monitors or installed systems.
The motor is based on a 38 mm copper voice coil, combined with a copper shorting cap, optimising response at the top end of the spectrum and reducing distortion due to inductance. This design results in cleaner, more detailed reproduction of high frequencies, a characteristic sought after in professional full-range loudspeakers.
The ferrite magnet system, with a flux density of 1.4 Tesla, ensures stable and constant behaviour even at sustained operating levels. The accordion-style suspension and radially profiled cone contribute to good mechanical strength and an even response across the entire frequency range.
With a sensitivity of 101 dB, this transducer boasts excellent efficiency, making it an appropriate choice for systems with high acoustic pressure operating at moderate power levels. Its bandwidth of 80 Hz to 16 kHz ensures full, intelligible reproduction, suitable for vocal, musical or instrumental broadcast applications, particularly in portable loudspeakers, stage monitors or installed systems.
The motor is based on a 38 mm copper voice coil, combined with a copper shorting cap, optimising response at the top end of the spectrum and reducing distortion due to inductance. This design results in cleaner, more detailed reproduction of high frequencies, a characteristic sought after in professional full-range loudspeakers.
The ferrite magnet system, with a flux density of 1.4 Tesla, ensures stable and constant behaviour even at sustained operating levels. The accordion-style suspension and radially profiled cone contribute to good mechanical strength and an even response across the entire frequency range.
Other features
-
B&C Speakers 320K/C-A 8 Ohm
-
12" (30 cm) full-range speaker
-
Power: 120 W AES / 240 W programme
-
Sensitivity: 101 dB (2.83 V / 1 m)
-
Frequency response: 80 Hz - 16,000 Hz
-
Voice coil: 1.5" (38 mm) copper
-
Magnet : Ferrite
-
Cone: Radial
-
Suspension: Accordion
-
Spider : Single
-
Short circuit cover : Copper
-
Recommended load: 60 L, tuned to 75 Hz
-
Fs : 82 Hz
-
Qts: 0.50
-
Xmax: 2 mm
-
Bl: 12.2 Tm
-
Le: 1.1 mH
-
Dimensions: Ø316 × 136 mm
-
Weight : 4,6 kg
-
Supplier code : ALT320KC8A
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
