Cranborne Audio - CAMDEN500
324,17 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Anais
Tristan
Do you need help?
Studio Channel
Microphone preamplifier and signal processor in 500 series module format
ARTICLE N° 79161
Presentation
The Camden 500 has been designed from the ground up to be the ultimate mic preamp for the modern studio and engineer and to withstand the rigors of modern production techniques and workflows. It features an entirely original topology that achieves astonishing low noise and low distortion performance, as well as frequency and phase linearity at all gain settings.
The Camden 500 has been designed to maintain all of its impressive performance specifications at all gain positions from 8dB to 68dB. This means that even when the preamp is operating at maximum gain, the phase and frequency response remains linear and the THD remains inaudible - allowing all gain positions to be usable for any source and mic combination.
The Camden 500 has been designed to maintain all of its impressive performance specifications at all gain positions from 8dB to 68dB. This means that even when the preamp is operating at maximum gain, the phase and frequency response remains linear and the THD remains inaudible - allowing all gain positions to be usable for any source and mic combination.
Features
Canals
1
Pre-amp
Yes
Compressor
No
Limiter
No
Instrument input
Yes
Phantom power
Yes
Packaging
Single unit
Other features
-
Cranborne Audio Camden 500
-
Microphone preamplifier and signal processor in 500 series module format
-
Minimum gain: mic= 8dB, line= 0dB, Hi-Z = 3dB
-
Maximum gain: mic = 68dB, line = 60dB, Hi-Z = 63dB
-
Input impedance: mic= 8.9 kohms 48V Off, 5.4 kohms 48V ON, line = 24.3 kohms, Hi-Z= 1.5 Mohms unbalanced, 3 Mohms balanced
-
Max input level: mic = 17.6dBu (<0.003% THD), line = 26.5dBu (<0.02% THD), Hi-Z = 24dBu (<0.02% THD)
-
Output impedance: 150 ohms
-
Max output level: 27.5 dBu (<0.002% THD, 30dB gain)
-
Equivalent input noise (EIN): <-129.5 dBu (150 ohms source, unweighted), <-131 dBu (150 ohms source, A-weighted), <-135.5dBu (Unweighted inputs)
-
Frequency response: ± 0.25dB (5 Hz to 200 kHz, 35dB gain), <±1dB (5 Hz to 200 kHz, max gain)
-
Phase shift: < 2.25° (40dB gain, 20Hz to 20kHz)
-
THD+N: <0.0004% (1kHz, 35dB gain, 24dBu output)
-
Intermodulation distortion: <0.0006% (50Hz and 7kHz, 35dB gain, 15dBu output)
-
High-pass filter: 80Hz, -3dB, 12dB/Oct
-
Consumption: 140 mA per rail
-
CMRR: >70dB, typ >85dB, 35dB gain, 10-20kHz, 100mV Common mode
-
Dimensions: 32 x 133 x 170mm
