Electro-Voice - TX 1122 FM
855 €
excl VAT
including eco-part : 0,90 €
In Stock
Usually ships within 10 days
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Passive Loudspeaker
Electro-Voice TX1122FM Compact, 2-way, full-range passive monitor offering up to 500W RMS power (2000W peak). The TX1122FM complements the Tour X series speakers. Sold individually.
ARTICLE N° 87560
Presentation
Electro Voice's compact TX1122FM monitor is equipped with a SMX2121 12" woofer developed with FEA optimisation for the motor, suspension and electrical design to ensure very low distortion, high efficiency and maximum intelligibility at high SPL levels.
The tweeter features a high-efficiency DH3 titanium compression driver with a 1.25" diaphragm, coupled to a 90° x 50° constant directivity waveguide.
The crossover uses very steep slopes of 24dB per octave with equalisation to provide harmonious imaging in the frequency range corresponding to the voice, linear off-axis response and a protection circuit for long-term reliability.
The combination of drivers, cabinet and crossover results in a compact monitor capable of very high sound levels before feedback.
The technicians at SonoVente.com recommend the EV TX1122FM stage monitor for small to medium-sized stages, where applications require high-quality vocal and instrument reproduction in a small footprint.
The tweeter features a high-efficiency DH3 titanium compression driver with a 1.25" diaphragm, coupled to a 90° x 50° constant directivity waveguide.
The crossover uses very steep slopes of 24dB per octave with equalisation to provide harmonious imaging in the frequency range corresponding to the voice, linear off-axis response and a protection circuit for long-term reliability.
The combination of drivers, cabinet and crossover results in a compact monitor capable of very high sound levels before feedback.
The technicians at SonoVente.com recommend the EV TX1122FM stage monitor for small to medium-sized stages, where applications require high-quality vocal and instrument reproduction in a small footprint.
Other features
-
Electro-Voice TX1122FM
-
Passive stage monitor
-
12" SMX2121 low-distortion woofer with symmetrical drive
-
1.25-inch DH3/2010A titanium compression tweeter
-
Advanced 4th order crossover with RF protection
-
90º H x 50º V constant directivity horn
-
Power handling: 500 W continuous, 2000 W peak
-
99 dB sensitivity
-
Max sound pressure level 132 dB
-
Frequency response 55Hz to 20kHz
-
Impedance 8 Ohm
-
Crossover frequency 1600Hz
-
Neutrik NL4 connectors
-
Plywood & MDF with EVCoat coating
-
Dimensions: 440 x 364 x 573mm
-
Net weight: 19.8 kg
To find out more...
The characteristics of the TX1122FM make it a speaker dedicated to stage monitoring.
The cabinet is constructed from a blend of plywood and MDF with an EVCoatTM coating offering maximum protection while keeping the weight down.
The uniquely designed grille is extremely impact-resistant and features a directional logo.
Four-position handles make it easy to move the TX1122FM.
The recessed input panel has two NL4 sockets, with the connectors concealed and protected from impact on stage.
The cabinet is constructed from a blend of plywood and MDF with an EVCoatTM coating offering maximum protection while keeping the weight down.
The uniquely designed grille is extremely impact-resistant and features a directional logo.
Four-position handles make it easy to move the TX1122FM.
The recessed input panel has two NL4 sockets, with the connectors concealed and protected from impact on stage.
