Studio Monitors

Focal Alpha 65 proximity loudspeaker in white limited version. This active 2-way monitor speaker is equipped with a 35W amplifier for the tweeter, and 70 W for the woofer. The Alpha 65 active loudspeakers are a professional monitoring system with low directivity to maintain a consistent listening throughout the room.

ARTICLE N° 56781
  • Focal Alpha 65 Limited Edition White.
  • Proximity Proximity Control Speaker.
  • Limited Edition.
  • Price per piece.
  • Active 2-way speaker 105W (70W & 35W).
  • Equipped with a 25mm (1 ") inverted aluminum dome tweeter and a 6.5" (16.5cm) Polyglass woofer, the most compact in the range.
  • Equipped with a 35W amplifier for the tweeter and 70W for the woofer, it offers a frequency response of 40 Hz to 22 kHz (+/- 3 dB).
  • Frequency response (+/- 3 dB): 40 Hz - 22 kHz.
  • Maximum SPL level: 106 dB SPL (peak @ 1 m).
  • Connector Inputs: 10 kOhm symmetrical XLR, 10 kOhm asymmetrical RCA with compensated sensitivity.
  • Mid and low frequency amplifier: 70 W (music), Class AB.
  • High Frequency Amplifier: 35 W (music), Class AB.
  • Standby mode, Monitor activation: After about 30 minutes without use, By signal detection> 3 mV.
  • Power supply: Voltages: 220-240 V (fuse T800mAL / 250 V).
  • Connection: IEC plug and removable power cord.
  • Sensitivity: Adjustable, 0 or +6 dB.
  • Mid / Bass level (0 - 300Hz): Adjustable, +/- 6 dB.
  • Level of acute (4.5 - 22 kHz): Adjustable, +/- 3 dB.
  • On / Off: Switch on the rear panel.
  • Standby Power Consumption <0.5 W.
  • Visualizations and Controls: Power On and Off LEDs, Standby LEDs.
  • 15 mm MDF construction.
  • Finishing: Vinyl and black and white paint.
  • Dimensions with 4 rubber studs (HxWxD): 348 x 252 x 309 mm.
  • Weight: 9.4 kg.
  • Package Contents: manual, power cord, 4 rubber pads, 1 warranty card.
  • Key Points:
  • Low Directivity: Keep the same sound throughout the room.
  • Damping and rigidity: sound neutrality, no distortion.
  • Identical tonal balance at low and high sound level; low sensitivity to the wall effect.
  • Connect up to 2 audio sources: balanced XLR or RCA 10 kOhms.
  • Optimal acoustic integration.
  • Optimization of the electricity consumption.

Spotlight on