Focusrite - ISA-ADN2
415,83 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Anais
Tristan
Do you need help?
Audio Interfaces
Two-channel A-D card providing high-quality analogue-to-digital conversion for the ISA One mic and DI preamp. Featuring Dante, AES3, ADAT and S/PDIF connectivity, the card operates at sampling rates of up to 24-bit/192kHz.
ARTICLE N° 82234
Presentation
The card offers primary and secondary Dante RJ45 output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and an RCA connector for S/PDIF output.
Word Clock inputs/outputs on BNC connectors enable synchronisation with multiple digital sources.
This also includes synchronisation of the Dante network with the internal clock or synchronisation of external equipment with the Dante network.
Dante outputs on the board provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-compatible device from hundreds of manufacturers.
Measurement and settings are accessed via RedNet Control, routing is configured using Dante Controller.
Word Clock inputs/outputs on BNC connectors enable synchronisation with multiple digital sources.
This also includes synchronisation of the Dante network with the internal clock or synchronisation of external equipment with the Dante network.
Dante outputs on the board provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-compatible device from hundreds of manufacturers.
Measurement and settings are accessed via RedNet Control, routing is configured using Dante Controller.
Other features
-
Focusrite ISA- ADN2
-
A-N expansion card
-
Compatible with ISA One preamp / DI
-
AUDIO PERFORMANCE
-
0DBFS reference level: 22dBu
-
Frequency response: 20Hz - 20kHz ±0.1dB
-
THD+N: -105dB (0.0006%), 20Hz - 20kHz; -1dBFS at input
-
Signal-to-noise ratio : -121dBu
-
Dynamic range: 121dB, 20Hz - 20kHz
-
DIGITAL
-
Supported frequencies : 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4%/-0.1%/+0.1%/+4.167%) in 24 bit
-
Clock sources: Internal or Word Clock
-
CROSSTALK (input to input): < -100dB; 20Hz - 20kHz (channel @ -20dBFS)
-
DANTE: 2 channels, on 2 RJ45 ports (Primary & Secondary)
-
AES3: 2 AES3 channels, output on male XLR
-
ADAT
-
2 channels
-
Output: TOSLINK
-
Channel assignment @ 44.1 KHz, 48 KHz, Port 1 = channels 1-2
-
Channel assignment @ 88.2 KHz, 96 KHz: SMUX I, Port 1 = Channels 1-2
-
Channel assignment @ 176.4 KHz, 192 KHz: SMUX II, Port 1 = Channels 1-2
-
S/PDIF
-
2 S/PDIF channels
-
Output: RCA phono
-
WORD CLOCK
-
Input: BNC 75O (Switchable termination)
-
Output: BNC 75O
You may also like
Spotlight on
Focusrite is a British brand specialized in home studio and pro studio products. Initially known for the high-end consoles created by its founder, sound engineer Rupert Neve, the brand now offers products for every purpose. From professional quality microphone preamps to audio interfaces and even complete recording packages, Focusrite has the quality gear you deserve. From the best-selling Scarlett range, ideal for home studio use, to the ISA range, including Clarett+ and RedNet, there is something for everyone!
