Focusrite - RedNet R1
Versatile control surface for Focusrite Red audio interfaces that helps you perfect your workflow. When paired with a Red interface, it gives you total control over monitor selection, source selection and offers Dante, Pro Tools, HD and Thunderbolt connectivity. It can be used to manage remotely controllable mic preamps on your interfaces, so you can keep your interface in the rack and de-clutter your desk.
Presentation
Sources are selected via the front panel or configured using the included RedNet Control application for PC and Mac.
Mix and monitor in Dolby Atmos using any combination of the eight selected source groups, in formats ranging from mono to 12-channel audio and other immersive 7.1.4 formats.
The RedNet R1 features a Dante-compatible talkback with built-in mic and an internal mic preamp for connecting an external mic, with a high-power headphone output, so you can monitor audio inputs and outputs and interact with talent from another location.
Up to four talkback destination groups are available when used with a Red interface (when used with other Dante devices, only one talkback group is available).
There's also a headphone output so you can isolate sources and listen to them before playing them into your monitors.
Other features
-
Focusrite RedNet R1
-
Control surface
-
Display: 2 LCD screens
-
Phantom power: Yes
-
Category: audio network card
-
Inputs : Dante, XLR
-
Sampling frequency: 96 kHz
-
Built-in microphone: Yes
-
No. of channels: 2
-
Number of microphone inputs: 1
-
Outputs: Headphone/Line, Dante
-
INTERNAL TALKBACK :
-
Gain range: 0dB to 55dB
-
Type: electrically balanced (input impedance: 3kΩ)
-
Max input level: +10dBu ± 0.5dB
-
EXTERNAL TALKBACK :
-
Gain range: 0dB to 55dB
-
Max input level : +10dBu ± 0.5dB
-
Frequency response : 20Hz - 20kHz ± 2dB
-
THD + N : <-98dB (0.0012%) @ -1dBFS
-
Equivalent input noise: <-128dBu
-
Signal-to-noise ratio : -111dB A
-
Common mode rejection: 50/60Hz CMRR: <-77dB
-
Type: electrically balanced (input impedance = 3kΩ)
-
HEADPHONE OUTPUT :
-
0DBFS reference level: +11dBm
-
Frequency response : 20Hz to 20kHz ±0.5dB
-
THD + N : -100dB (0.001%) @ -1dBFS, Rs = 150R
-
Dynamic range: 108dB, 20Hz - 20kHz
-
Noise in presence of Signal : >-97 dBu A
-
Output impedance: 5Ω
-
Headphone impedance : 32Ω - 600Ω
-
MICROPHONE & LINE CROSSTALK:
-
Mic input to headphone output: <-84dB; 20Hz - 20kHz (other channels @ 0dBFS)
-
HEADPHONE CROSSTALK :
-
Left to right: <-85dB; 20Hz - 20kHz (other channels @ 0dBFS)
-
Right to left: <-85dB; 20Hz - 20kHz (other channels @ 0dBFS)
-
DIGITAL :
-
Supported frequencies: 44.1/48/88.2/96kHz (-4%/-0.1%/+0.1%/+4.167%) at 24 bit
-
Clock sources: Internal or External from the Dante network
Videos
Spotlight on
Focusrite is a British brand specialized in home studio and pro studio products. Initially known for the high-end consoles created by its founder, sound engineer Rupert Neve, the brand now offers products for every purpose. From professional quality microphone preamps to audio interfaces and even complete recording packages, Focusrite has the quality gear you deserve. From the best-selling Scarlett range, ideal for home studio use, to the ISA range, including Clarett+ and RedNet, there is something for everyone!
