Providence - SDT-3 Stampede Distortion
149,17 €
excl VAT
including eco-part : 0,90 €
In Stock
Usually ships within 3 days
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Electric Guitar Effects
Punchy distortion with big fundamentals. Gain and tone controls offer a wide spectrum of sounds that can add new dimensions to your music, from natural crunch to fuzzy, dirty distortion. Using the same voltage boost circuit as the Stampede OD SOV-2 overdrive pedal, the output of the 9-volt battery is increased to 18 volts! A level capable of delivering sonic depth and a wide dynamic range impossible to achieve with a simple 9-volt power supply.
ARTICLE N° 73806
Presentation
The TREBLE and BASS controls can be used to optimally match the pedal output to the amp used for the most musical response. These controls, in combination with the GAIN control, offer an extraordinary range of tonal variations.
In standard true bypass circuits, the instrument signal passes through two switching contacts when bypassed.
The SOV-2 Single Contact True Bypass configuration ensures that the signal passes through only one switching contact when bypassed, for unrivalled signal quality and reliability.
Due to the adoption of the new Dual Contact Grounding Circuit (D.C.G. Circuit), by inserting a mono plug into the output socket, the shield (sleeve) of the plug provides two points of contact with the pedal's ground circuit.
By increasing the surface area of the contact point, it becomes more difficult for a loose connection to occur and offers the added benefit of improved sound quality.
As well as indicating the on/off status of the pedal, the LED provides effective visual monitoring of battery power.
When the battery voltage falls below 7 volts, the LED becomes dimmer and starts to go out.
The effect will still operate at this voltage, but to ensure optimum performance, the battery should be replaced as soon as possible.
In standard true bypass circuits, the instrument signal passes through two switching contacts when bypassed.
The SOV-2 Single Contact True Bypass configuration ensures that the signal passes through only one switching contact when bypassed, for unrivalled signal quality and reliability.
Due to the adoption of the new Dual Contact Grounding Circuit (D.C.G. Circuit), by inserting a mono plug into the output socket, the shield (sleeve) of the plug provides two points of contact with the pedal's ground circuit.
By increasing the surface area of the contact point, it becomes more difficult for a loose connection to occur and offers the added benefit of improved sound quality.
As well as indicating the on/off status of the pedal, the LED provides effective visual monitoring of battery power.
When the battery voltage falls below 7 volts, the LED becomes dimmer and starts to go out.
The effect will still operate at this voltage, but to ensure optimum performance, the battery should be replaced as soon as possible.
Other features
-
Providence SDT-2 Stampede
-
Distortion Pedal
-
For guitar
-
True Bypass
-
Controls: Output, gain, bass, treble
-
Input / Output: 2 x 6.35 mm jacks
-
Power supply: 9V battery or adapter (supplied separately)
-
Dimensions: 115 x 73 x 50 mm
-
Weight : 250g
