Radial - Headload V16 Ohms Guitar Amp Load Box
This product is no longer available for sale
These models in stock may be of interest to you:
999,17 €
excl VAT
including eco-part : 0,90 €
Guarantee 3
years
Fred
Eric
Do you need help?
Electric Guitar Effects
Simulator and baffle attenuator (up to 130W RMS) version of 16 ohms at discrete circuit, whose direct output is now provided with JDX 6 HP simulation presets and refines through its 2-band equalizer. Existing version 4, 8 and 16 ohms, the Headload loadbox is the most advanced ever built.
ARTICLE N° 54557
Presentation
The Headload loadbox is decorated with a attenuation circuit - capable of handling up to 130 watts RMS continuous power and 180 watts at peak.
Inserted between the head and the cabinet, it allows the guitar amp to be pushed to its limits while drastically reducing the output level, thereby reducing sound pressure on stage or enable the recording studio at low volume . This also allows the artist to optimize the sound of his guitar amp without dangerously push its hardware.
The resistive design 100% discrete ventilated relies on a series of resistors wound ceramic controlled via a rotary switch positions 6 which determines the reduction of the desired power of 100% to 20%. A 'Trim' compensation manages adjustment below 20%. The output of Headload can be disabled for silent operation on stage, in recording or repeat using the headphone amplifier.
Inserted between the head and the cabinet, it allows the guitar amp to be pushed to its limits while drastically reducing the output level, thereby reducing sound pressure on stage or enable the recording studio at low volume . This also allows the artist to optimize the sound of his guitar amp without dangerously push its hardware.
The resistive design 100% discrete ventilated relies on a series of resistors wound ceramic controlled via a rotary switch positions 6 which determines the reduction of the desired power of 100% to 20%. A 'Trim' compensation manages adjustment below 20%. The output of Headload can be disabled for silent operation on stage, in recording or repeat using the headphone amplifier.
Other features
-
Radial Engineering Headload 16 Ohms
-
Simulator and attenuator baffle
-
type Resistive attenuator circuit (up to 130W RMS / 180W peak) and active equalization
-
Frequency response 90Hz -3dB 0 to 4KHz -6dB EQ serious: +/- 9 dB @ 80Hz acute EQ: +/- 9 dB @ 6 kHz
-
bass / treble Resonance 60Hz & 6.5KHz, shelf filter 6dB / octave 12dB at 20% load adjustment, + 9 dB to 40% charge control, + 6dB at 60% load setting, + 3dB at 80% load setting, None 100% charge control
-
400mW headphone amplifier 32 Ohms
-
Gain -40dB
-
Distortion intermodulation <0.05%
-
Noise -104dbu
-
impedances - input: 8 Ohms - Release: 250 Ohms
-
THD <0.05%
-
gain reduction variable from 0 to 100%
-
EQ Bass / treble
-
tray available charges 4 and 16 Ohms
-
Radial supply +/- 15V 400mA external
-
Dimensions: 154mm x 3 05mm x 87.6mm
-
Weight: 3.63kg
