Bass Effects

Preamp 2 channels for electric or acoustic bass pedal format for connecting simultaneously or independently two active instruments, or electro-acoustic passive, with the possibility of adapting the level and the equalizer in each of them!

ARTICLE N° 55036
  • Radial Engineering Tonebone Bassbone V2
  • Preamplifier 2 channels for low power
  • preamp two channels for one or two
  • instruments powerful and active EQ 3-band on channel 2
  • Boost switchable with volume control
  • loop
  • effects separate tuner output
  • DI integrated with XLR balanced output
  • input impedance 470K Ohm
  • output Impedance 10K Ohm
  • output Impedance 600 ohms XLR
  • Controls Level 1, Level 2, Low, Mid, high, Boost, XLR Ground Lift, Channel 1 Contour Switch,
  • Boost Assign
  • Switch Switch Contour Shape 1: +4.5 dB @ 110 Hz -5.1 dB @ 650 Hz +2.7 dB @ 4.3 kHz
  • Shape 2 + 3.7 dB @ 75 Hz -6.3 dB @ 350 Hz 11 dB @ 5.6kHz
  • Bass EQ: +/- 12dB @ 75Hz Mid: +/- 10 dB @ 470 Hz High: +/- 16dB @ 5.6 KHz
  • Boost +12 dB max
  • Dimensions: 175 x 108 x 54mm
  • Weight 1.06kg
Today, most bassists use at least two basses on stage. Maybe one of them is a vintage bass with low output level and the other, a fretless six-string active.
Switching between these low during a show would require EQ changes and volume on the amp, each instrument being very different from each other. Until now, the only option was to undermine the amp settings. Not anymore: enter the world of Bassbone. The
Bassbone solves the problem by providing two separate channels settings.
Headphone output
 No

Spotlight on