Home
Departments
Sound system
Deejay
Lighting
Homestudio
Musical Instruments
Hifi & Video
Cables
Truss
Flight Case

Rupert Neve Designs - Portico 5015H

This product is no longer available for sale
Rupert Neve Designs
Satisfaction guaranteed, or you get your money back within 45 days*
Warranty 3 years
Portico 5015H Rupert Neve Designs Portico 5015H Rupert Neve Designs Portico 5015H Rupert Neve Designs
Portico 5015H Rupert Neve Designs
Portico 5015H Rupert Neve Designs
Portico 5015H Rupert Neve Designs
1 665,83 €
Satisfaction guaranteed, or you get your money back within 45 days*
Warranty 3 years
Antonin
Antonin
Tristan
Tristan
Need help ?
Preamps

The Rupert Neve Designs Portico 5015-H combines the famous models of preamplifiers and compressors of the Portico series in an unbeatable Channel strip. The mic preamp on the Portico 5015 is identical to the 5012 and includes 72 dB of 2-stage gain, a low-cut filter, a 48V phantom power, a Mute and an 8-point LED VU meter.

ARTICLE N° 57402
Specifications

Specifications

  • Rupert Neve Designs Portico 5015H Channel Strip combining the 5012 preamp and the 5043 compressor.
  • Gain: Variable from -36 dB to +20 dB.
  • Threshold: Variable from -36 dB to +22 dB.
  • Ratio: Variable from 1.1: 1 to "Limit" (40: 1).
  • Attack: Variable from 20mS to 75mS.
  • Release: Variable from 100mS to 2.5 Seconds.
  • FF / FB: VCA Feed-Forward or Feed-Back Control.
  • S / C or LINK: Several 5043 can be chained via the rear panel jacks. When a single channel is turned on, its voltage control appears on the "LINK" jack. When both channels are switched on, they are "linked" together and their voltage controls also appear on the "LINK" jacks.
  • Selecting LINE or BUSS inputs: Use XLR inputs to enter the line level, or "Buss" jacks when using the Buss output of a Portico element.
  • Maximum output level: Transformer balanced output + 25dBu.
  • Total Harmonic Distortion: At 1kHz, + 20dBu level of output level, no load.
  • Main output, compressor "bypass"> 0.0006% Main output, compressor switched on> 0.02%.
  • Noise: Measured on the main output, 22Hz - 22kHz, 40 Ohm load.
  • Unit level gain, bypass compressor> -103dBu.
  • Unit Level Gain, Compressor On> -92dBu.
  • Frequency response: Main output, unity level gain at 18Hz, -3dB / at 150Hz, -3dB.
  • Crosstalk: Measured channel at better channel at -80dB @ 16kHz.
  • A / B Meters: Allows monitoring between "INPUT LEVEL" and "GAIN REDUCTION" between channels A and B.
  • 5043
  • Power Supply Voltage: 9 to 18 Volts DC, 9 watts.
  • Connector: 5.5mm X 2.5mm jack, positive in the center.
  • Consumption: at 9VDC = 1.0A at 12VDC = 730 mA at 15VDC = 570 mA at 18VDC = 480 mA.
  • Preamplifier Technical Specification Input: Symmetrical, using transformer-based amplifier with low-pass filter excluding frequencies above 150 kHz. Combines the advantages of an electronically balanced input with a real transformer. When phantom power is disengaged, it serves as a very high quality line input.
  • Input Impedance: 10,000 Ohms at + or - 20%.
  • Noise: measured at the main output: impedance 150 Ohms Measured from 22 Hz to 22 kHz: With gain at unit level> -100dBu. With 66 dB gain> -62 dBu Equivalent input noise> -128 dBu.
  • Frequency response: Main output, no load: at 10 Hz -0.2 dB at 160 kHz -3dB Buss output: measured at the "monitor amplifier" output of the Rupert Neve Designs 5014 "Buss Mixer": at 10 Hz -0.2 dB at 160 kHz -3dB.
  • High pass filter: Continuously sweeps the frequencies from 20 Hz to 250 Hz: curve: 12 dB / Octave.
  • Gain: unit gain at + 66dB, in steps of 6dB.
  • "Trim": Adjustable potentiometer from -6dB to + 6dB.
  • Maximum Output Level: Transformer Balanced Output, 20 Hz to 40 kHz: + 25dBu ("clipe" just above + 26dB).
  • "Mute" simply mutes the main outputs.
  • Noise and total harmonic distortion
  • Main output @ 1kHz, +20 dBu output level, no load> 0.001% (no higher level harmonics). "Silk" on: approximately 0.2% of secondary harmonics.
  • Main output @ 20Hz, + 20dBu output level, no load> 0.01%.
  • Output buss @ 1kHz, output level of + 20dBu, no load, measured at the output "monitor amplifier"> 0.002%.
  • "Silk" function: The Rupert Neve 5012 mainly uses single-face transformer circuits that exclude any risk of distortion. The silk button adjusts the frequency spectrum and delivers an extremely soft and musical sound.
  • Buss output: The "buss" output is intended to power the "buss" inputs of the Rupert Neve Designs 5014 and modules of the Portico series.
  • Crosstalk: Measured from channel to channel> -90dB at 15 kHz.
  • Phantom Power: +48 Volts DC +/- 1%.
  • Power Consumption: at 9VDC = 1.3A at 12VDC = 1A at 15VDC = 800 mA at 18VDC = 650 mA.
  • Rear Panel Power Connector: 5.5mm x 2.1mm DC jack, center positive.
Rupert Neve Designs - Portico 5015H
Rupert Neve Designs - Portico 5015H
1 665,83 €
Satisfaction guaranteed, or you get your money back within 45 days*
Warranty 3 years
Antonin
Antonin
Tristan
Tristan
Need help ?

Spotlight on

More informations

Similar Products