Shure - SLXD4QDAN+ G65
2 908,33 €
excl VAT
including eco-part : 0,13 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Wireless Microphone
The Shure SLXD4QDAN+ G65 features Dante for audio transport over Ethernet and supports up to 32 channels per band. Its audio summing feature adjusts to the mixer’s needs, and RF Cascade extends the configuration up to 8 channels. A rugged metal chassis and predictive switching diversity ensure reliability and ease of use.
ARTICLE N° 101750
Presentation
The Shure SLXD4QDAN+ G65 quad-band receiver combines professional flexibility with Dante connectivity to meet the needs of modern installations.
Its Dante audio network interface carries the signal over a single Ethernet cable, simplifying cabling in complex environments.
Its wide 138 MHz tuning range allows up to 32 channels to be used in the G65 band (depending on the regulations in force), covering a wide range of stage or event situations.
24-bit digital audio transmission ensures accurate reproduction, while the extended frequency range of up to 20 Hz – 20 kHz (depending on the microphone used) provides clarity and quality in all registers.
With a dynamic range of 118 dB, the SLXD4QDAN+ G65 preserves the nuances and dynamics of the performance. Audio Summing lets you configure the receiver output to match the number of channels available on your mixer, whether you want to send four, three, two, or a single audio stream.
RF Cascade lets you link two SLXD4Q+s together without any additional accessories to create an eight-channel array. The system also features convenient transmitter pairing via frequency scanning and infrared synchronization, speeding up on-site installation.
Housed in a rugged metal chassis, the SLXD4QDAN+ G65 features four XLR and four 1/4-inch outputs, as well as two local Ethernet ports. Digital feedforward diversity, coupled with bias-voltage power, enhances signal stability.
Compatible with the SLX-D Series (SLXD1, SLXD2/N8S, SLXD2/N8C, SLXD3), this receiver also supports Shure Wireless Workbench® control software for remote management.
Its Dante audio network interface carries the signal over a single Ethernet cable, simplifying cabling in complex environments.
Its wide 138 MHz tuning range allows up to 32 channels to be used in the G65 band (depending on the regulations in force), covering a wide range of stage or event situations.
24-bit digital audio transmission ensures accurate reproduction, while the extended frequency range of up to 20 Hz – 20 kHz (depending on the microphone used) provides clarity and quality in all registers.
With a dynamic range of 118 dB, the SLXD4QDAN+ G65 preserves the nuances and dynamics of the performance. Audio Summing lets you configure the receiver output to match the number of channels available on your mixer, whether you want to send four, three, two, or a single audio stream.
RF Cascade lets you link two SLXD4Q+s together without any additional accessories to create an eight-channel array. The system also features convenient transmitter pairing via frequency scanning and infrared synchronization, speeding up on-site installation.
Housed in a rugged metal chassis, the SLXD4QDAN+ G65 features four XLR and four 1/4-inch outputs, as well as two local Ethernet ports. Digital feedforward diversity, coupled with bias-voltage power, enhances signal stability.
Compatible with the SLX-D Series (SLXD1, SLXD2/N8S, SLXD2/N8C, SLXD3), this receiver also supports Shure Wireless Workbench® control software for remote management.
Other features
-
Shure SLXD4QDAN+ G65
-
Quad-band receiver for wireless transmission system
-
Dante audio networking, carried over a single Ethernet cable
-
Wide 138 MHz tuning range
-
G65 frequency range (470 to 606 MHz)
-
32 available channels per frequency band (region dependent)
-
Transparent 24-bit digital audio
-
Wide frequency range of 20 Hz to 20 kHz (microphone dependent)
-
118 dB dynamic range
-
Audio summing matches the receiver output to the available mixer channels (4, 3, 2 or 1).
-
RF Cascade creates an 8-channel system by linking two SLXD4Q+, no other accessories are required - Bias voltage power management
-
Digital predictive switching diversity
-
Easy pairing of transmitters and receivers via IR scan and sync
-
4 XLR and 4 1/4" outputs and 2 local Ethernet connections
-
Compatible with Shure Wireless Workbench® control software
-
Rugged metal construction
-
Dimensions: 393 x 152 x 42mm
-
Weight: 1.75kg
-
Compatible with SLX-D series transmitters: SLXD1; SLXD2/N8S; SLXD2/N8C; SLXD3.
You may also like
Spotlight on
SHURE, the most popular brand among musicians! The SM58 wired microphone for vocals and SM57 for instruments, the SM7B for vocals or the PG24E PG58 are the worldwide references available at Sonovente.com. Also available are the superb SRH studio and DJ headsets, the PGX and SLX HFs, the 55SH T2 skull mic...
Shure has developed USB mics that rival their analog mics in reliability and sound. Artists trust their wireless systems to stay connected in every situation. Shure has made professional gear accessible to the masses, creating superior in-ear monitors.
