PA Set

The Yamaha 4-wheel bundle comprises two 15" CXR15 MK3 speakers and an 18" CXS18 MK3 subwoofer, designed for high power output and deep bass. The speakers deliver 300 W RMS at 8 Ω with 126 dB, whilst the subwoofer delivers 500 W RMS and 129 dB to significantly boost the lower end of the spectrum. The SPW-1 castors make it easy to move the subwoofer around despite its large size.

ARTICLE N° 124525
The Yamaha CXR15 MK3 set is a passive 2.1 system designed for sound reinforcement set-ups requiring greater presence in the low frequencies. The two 15" speakers provide the main sound output, whilst the 18" subwoofer delivers the bass range with greater depth. The system operates with an external amplifier and connects simply via SpeakON connectors. This type of setup is suitable for stages, outdoor events or installations requiring a powerful sound foundation.

The CXR15 MK3 speakers operate at 8 Ω with a power rating of 300 W RMS and a peak power of 1200 W. The 15" driver is paired with a 1-inch compression driver with a crossover frequency of 1.8 kHz. The frequency response ranges from 50 Hz to 20 kHz and the maximum sound pressure level reaches 126 dB. Yamaha recommends 600 W RMS amplification at 8 Ω to get the best performance from these speakers.

The CXS18 MK3 subwoofer operates at 8 Ω with a power rating of 500 W RMS and 1000 W peak. Its 18" driver extends down to 35 Hz to provide clear extension at the lower end of the spectrum. It achieves a maximum sound pressure level of 129 dB and requires a recommended amplifier output of 1000 W RMS at 8 Ω. Its plywood cabinet is fitted with handles, inserts and mounting points for integration into both fixed and portable installations.

The SpeakON NL4MP connectors allow for simple cabling between the various system components and the amplifier. The supplied SPW-1 castors mount directly onto the cabinet to simplify movement despite its considerable weight. The system is designed for performances where the equipment is regularly set up and taken down. After registering on the Yamaha website within 6 months of purchase, the speakers’ warranty can be extended to up to 7 years.
Peak power (W)
 1200
RMS power (W)
 300
Acoustic pressure (dB)
 From 120 to 130
Enclosure type
 With Vent
Speaker
 15"
Tweeter
 1"
Aerial installation
 Yes
Can be used on stand
 M10 threaded inserts, Ø 35 mm (1 3/8"), M8 threaded inserts
Subwoofer included
 Yes
Weight
 87.0 kg
  • Speaker Set + Subwoofer + Castors, comprising:
  • .
  • Yamaha CXR15 MK3
  • 2 passive speakers
  • Bass-reflex design
  • Impedance: 8Ω
  • Peak power: 1200 W
  • RMS power: 300 W
  • Recommended amplifier: 600 W RMS @ 8Ω
  • Max SPL: 126 dB
  • .
  • Driver: ∅381 mm (15")
  • Voice coil: ∅76 mm (3")
  • Magnet: Ferrite
  • Tweeter: ∅2.54 mm (1") throat compression driver
  • Tweeter diaphragm: ∅44.45 mm (1.75") polyimide
  • Tweeter magnet: Ferrite
  • Frequency response: 50 Hz ⭢ 20 kHz
  • Crossover frequency: 1.8 kHz
  • Directivity: H90° x V60°
  • .
  • Connectors: 2x SpeakON NL4MP (Parallel)
  • Enclosure: Polypropylene, Black
  • Floor monitor angle: 52°
  • Mounting points: M10 & M8
  • ∅35 mm inserts: 2 (0° & -7°)
  • Dimensions of one speaker: 699 x 447 x 380 mm
  • Weight: 38 kg
  • .
  • Warranty: Up to 7 years
  • Following registration on the Yamaha website within 6 months
  • +
  • Yamaha CXS18 MK3
  • Passive subwoofer
  • Bass-reflex / Pass-band design
  • Impedance: 8Ω
  • Peak power: 1000 W
  • RMS power: 500 W
  • Recommended amplifier: 1000 W RMS @ 8Ω
  • Max SPL: 129 dB
  • .
  • Speaker: ∅457 mm (18")
  • Voice coil: ∅101.6 mm (4")
  • Magnet: Ferrite
  • Frequency response: 35 Hz ⭢ 120 kHz
  • Directivity: Omnidirectional
  • .
  • Connectors: 2x SpeakON NL4MP
  • Cabinet: Plywood, Black
  • Handles: 2
  • Mounting holes: ∅35 mm + M20
  • Fitting for 4 castors (SPW-1, sold separately)
  • Dimensions: 721 x 683 x 563 mm
  • Weight: 49 kg
  • .
  • Warranty: Up to 7 years
  • Following registration on the Yamaha website within 6 months
  • +
  • Yamaha SPW-1
  • Castors for subwoofer cabinet
  • Supplied in sets of 4
  • Castors: ∅75 mm
  • Tread width: 27 mm
  • Radial ball bearings
  • Plate dimensions: 100 x 62 mm
  • Materials: Steel + rubber
  • .
  • Compatible with:
  • DXS18XLF
  • DXS18XLF-D
  • DXS15XLF
  • DXS15XLF-D
  • CXS18XLF
  • CXS15XLF
  • DXS18
  • DXS15mkII
  • DXS12mkII
The dual-angle mounting bracket integrated into the Yamaha CXR15 MK3 adjusts the dispersion angle according to the height of the audience. This allows you to direct the sound energy towards the target area, improving perceived clarity without unnecessarily increasing the overall volume.

The specific positioning of the ports on this loudspeaker limits the formation of internal standing waves. This design contributes to a more consistent bass response, with fewer variations depending on the volume or nature of the audio signal.
Yamaha - Pack CXR15 MK3 (la paire) + Sub CXS18 MK3 + 4 Roulettes
Yamaha - Pack CXR15 MK3 (la paire) + Sub CXS18 MK3 + 4 Roulettes
New
2 503,33 € excl VAT
Out of stock
Guarantee 7  years
Jessie
Jessie
Louis
Louis
Do you need help?

Spotlight on