Speaker driver

10" (25cm) 500W AES / 8 ohms Speaker Ferrite Magnet B&C 10FW64

ARTICLE N° 62553
Application area of ​​the B&C Speakers 10FW64: Used in Bass/Midrange, the B&C 10 FW 64 will find its place as a satellite. For medium power the 10FW64 can be completed by a 1" motor like the DE250 and for larger systems by 1.4" motors like the DE610 or DE780TN.
  • B&C 10FW64 Bass/Medium in 10" (25cm)
  • Power 500W AES / 8 Ohms
  • Sensitivity 98db 1w/1m
  • Bandwidth 65Hz - 3KHz
  • Mobile coil 2.5" (64 mm) Aluminum wire
  • Magnet: Ferrite
  • Total diameter: 261 mm Height 116mm
  • Weight: 5.9 Kg
  • Recommended load: 26 Liters with tuning at 63Hz
  • Fs 63Hz
  • Qts 0.23
  • Xmax 5.0mm
  • Double roll suspension
  • Exponential cone waterproof treatment front rear
  • Single spider
Many integrators and loudspeaker manufacturers around the world now use B&C Speakers loudspeakers or drivers. Since 1945, this Italian manufacturer has been a key player in the speaker market. Everything has been done to occupy this leading position: Identify the need before designing, analyze the capabilities and technical constraints in order to obtain the optimal result, have flawless quality control. Today, B&C Speakers offers more than a quality product, a sure value. From its complete range of 1" to 2" drivers equipped with neodymium magnets, to the many models of speakers from 5cm to 54cm, each loudspeaker like the 10FW64 is tested in extreme conditions of use. Reliability and high quality, such is the philosophy adopted by B&C Speakers
B&C Speakers - 10 FW 64 8 Ohm
B&C Speakers - 10 FW 64 8 Ohm
124,17 € excl VAT
In Stock
Usually ships within 15 days
+infos
Jessie
Jessie
Louis
Louis
Do you need help?

Spotlight on