B&C Speakers - 10MD26 16 Ohm

The 10MD26 16 Ohm from B&C Speakers is a 10-inch midrange driver designed to meet the needs of professional systems requiring both accurate reproduction and good power handling over a wide range.

Its size makes it an excellent choice for reproducing low-midrange frequencies up to approximately 4 kHz, whether in a high-performance two-way speaker or as a dedicated midrange driver in a three-way configuration.

With its 3-inch aluminum voice coil mounted on a fiberglass mount, this driver is capable of handling up to 350 W of nominal power while maintaining excellent thermal control.

The ferrite magnet structure, combined with a rigid aluminum basket, ensures high mechanical stability, limiting distortion at high volumes and guaranteeing a clean response, even under intensive use.

The cone's effective surface area (320 cm²) allows for significant airflow, giving the 10MD26 excellent low-midrange efficiency. Its response range extends from 80 Hz to 4000 Hz, making it flexible enough to cover a large portion of the audible spectrum while maintaining a natural sound.

All this is contained in a compact format (262 mm diameter, 110 mm depth), making it easy to integrate into conventional PA speakers.

In terms of mounting, the baffle is prepared for a 230 mm cutout diameter, and the front panel is 14 mm thick, leaving ample room for custom configurations. Its nominal impedance of 16 ohms makes it a good choice for parallel setups or complex multi-way configurations.