ISP Technologies - Decimator Pro Rack G Stereo Mod
582,50 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Anais
Tristan
Do you need help?
Compressor / Gate
The Decimator Pro Rack G Stereo Mod features additional connections, allowing you to connect your guitar directly to it before sending the signal back to the input of your amp. This extra connection allows the Decimator to track your instrument's signal even more accurately. Channels 1 and 2 are still available to provide noise reduction for 2 separate effects loops or stereo channels.
ARTICLE N° 73542
Presentation
The Decimator ProRackG is the only system in the world designed with two channels of noise reduction configured specifically for high-gain guitar applications allowing one channel to provide noise reduction for the guitar directly and a second channel to eliminate amplifier gain noise.
The first channel eliminates 50 or 60 Hz hum, stage light noise and any other noise picked up directly by the instrument.
The ProRack Channel 1 output drives the input of your amplifier and eliminates all input noise picked up by the guitar.
The second channel's control circuitry detects and tracks the guitar signal directly, while the signal processing audio chain is connected to the amp's effects loop.
Now you can attenuate even the most insane noise with any amplifier system that incorporates a series effects loop.
The first channel eliminates 50 or 60 Hz hum, stage light noise and any other noise picked up directly by the instrument.
The ProRack Channel 1 output drives the input of your amplifier and eliminates all input noise picked up by the guitar.
The second channel's control circuitry detects and tracks the guitar signal directly, while the signal processing audio chain is connected to the amp's effects loop.
Now you can attenuate even the most insane noise with any amplifier system that incorporates a series effects loop.
Other features
-
ISP Technologies Decimator Pro Rack G Stereo Mod
-
Rackable Gate effect
-
Input impedance: 470 kΩ
-
Output impedance: less than 1 kΩ
-
Maximum input level: +20dbu
-
Dynamic range: greater than 118dB typical
-
Effective noise reduction: greater than 120db
-
THD: less than 0.05
-
Controls :
-
Potentiometer Filter Tracking: ± 20
-
2 Channel In/Out switches
-
2 Input Level Switches: -10 / +4 dB
-
2 Treshold pots: -70 / +10 dB
-
Rear switches: Ground /Lift
-
Inputs / Outputs: 6 x 6.35 mm jacks
-
Power supply: 9V AC, 900mA, adapter supplied
-
Format Standard Rack 19" 1U
-
Dimensions: 483 x 1178 x 44 mm
