Mad Professor - Royal Blue Overdrive
149,17 €
excl VAT
including eco-part : 0,90 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Fred
Eric
Do you need help?
Electric Guitar Effects
An overdrive pedal that can go as far as distortion, it can also be used as a clean boost with its Distortion setting at minimum. Like the best amps, the Royal Blue OD is highly sensitive to touch, allowing you to determine its impact according to the strength of your playing and the volume of your guitar, on any clean or slightly overdriven amp.
ARTICLE N° 83533
Presentation
Its crossover is reduced to a minimum to remain transparent and adjustable thanks to the Bass and Treble controls.
Important: for best results, do not use a buffer pedal before the Royal Blue OD.
Important: for best results, do not use a buffer pedal before the Royal Blue OD.
Other features
-
Mad Professor Royal Blue Overdrive
-
Effect for electric guitar
-
Type : Overdrive
-
Controls : Volume, drive, bass, treble
-
Mode : True Bypass
-
Input / Output : 2 x 6.35 mm jacks
-
Power supply: 9 V battery or 7.5-18 V DC adaptor (sold separately)
-
Dimensions: 111 x 69 x 50 mm
-
Weight : 300 g
To find out more...
Royal Blue Overdrive controls :
VOLUME: sets the overall output level of the pedal.
DISTORTION: controls distortion, for most dynamic response sets where the amount of distortion is controllable with the force of the strike.
TREBLE: A shelving boost/cut EQ that controls the amount of treble, working somewhere between a Bright switch and the treble control on most amps.
Treble can be used to add brightness to even bright amplifiers without interfering with the treble boost typical of most amps.
BASS: A boost/cut shelving equalizer that controls the bass, just above the resonance of a standard 4×12 cabinet. With bass and treble on, you can get a heavy, hollow tone; turn the knobs down for a soft mid-boost tone.
SETTINGS :
For Midboost: set Treble and Bass to the left.
For Midcut: set Treble and Bass all the way to the right.
VOLUME: sets the overall output level of the pedal.
DISTORTION: controls distortion, for most dynamic response sets where the amount of distortion is controllable with the force of the strike.
TREBLE: A shelving boost/cut EQ that controls the amount of treble, working somewhere between a Bright switch and the treble control on most amps.
Treble can be used to add brightness to even bright amplifiers without interfering with the treble boost typical of most amps.
BASS: A boost/cut shelving equalizer that controls the bass, just above the resonance of a standard 4×12 cabinet. With bass and treble on, you can get a heavy, hollow tone; turn the knobs down for a soft mid-boost tone.
SETTINGS :
For Midboost: set Treble and Bass to the left.
For Midcut: set Treble and Bass all the way to the right.
