Neumann - KH 420 (la pièce)
4 081,67 €
excl VAT
including eco-part : 0,90 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Anais
Tristan
Do you need help?
Studio Monitors
The Neumann KH 420 is a 3-way active studio monitor, equipped with a 10" driver rated at 400W, a 3" midrange driver rated at 190W and a 1" tweeter rated at 210W. The speaker is sold individually.
ARTICLE N° 63207
Presentation
The Neumann KH 420 is equipped with a Mathematically Modeled Dispersion Waveguide (MMD), acoustic compensation settings, various input options and offers a wide range of mounting and fixing accessories. This allows the loudspeaker to be used in a variety of acoustic conditions with any signal source and in a wide range of physical locations. The KH 420 is the result of the latest acoustic and electronic simulation technologies, ensuring the most accurate sound reproduction possible.
Other features
-
Neumann KH 420
-
Tri-amplified speaker
-
Sold by the piece
-
Free-field frequency response ±3 dB: 26 Hz to 22 kHz ±3 dB
-
Free-field frequency response ±2 dB: 28 Hz to 20 kHz ±2 dB
-
Self-noise level (INPUT GAIN set to 0 dB, OUTPUT LEVEL set to 100 dB SPL) <19 dB(A) at 10 cm
-
THD < 0.5% at 95 dB SPL at 1 m > 120 Hz
-
Maximum SPL level in free space with sine wave at 3% THD at 1 m, half-space calculation: 116.4 dB SPL / 122.4 dB SPL (averaged between 100 Hz and 6 kHz)
-
Bass power: Maximum SPL level in half-space for 3% THD at 1 m: 109.9 dB SPL (averaged between 50 Hz and 100 Hz)
-
Maximum short-term SPL level with IEC weighted noise (IEC 60268-5) at 1 m, under typical listening conditions: 109 dB(C) SPL
-
Maximum short-term SPL level with music signals at 2.3 m, in a typical installation: 102 dB(C) SPL (full range) / 109 dB(C) SPL (with subwoofer)
-
Maximum long-term SPL level with pink noise at 2.3 m, in a typical installation (with a single speaker/pair of speakers): 90/96 dB(C) SPL (full range) / 90/96 dB(C) SPL (with subwoofer)
-
MMDTM Waveguide nominal dispersion angle: 110 ̊ x 80 ̊
-
Electronic characteristics
-
Class AB woofer amplifier, continuous (peak) output power: 295 W (330 W), THD and noise < 0.1% with limiter off
-
Class AB tweeter amplifier, continuous (peak) output power: 130 W (140 W), THD and noise < 0.1% with limiter deactivated
-
Class AB midrange amplifier, continuous (peak) output power: 130 W (140 W), THD and noise < 0.1% with limiter deactivated
-
Controller type: analogue, active
-
Crossover frequency: 570 Hz, 2.0 kHz; 24 dB/oct. 4th order
-
Analogue input
-
Input type XLR (electronically balanced)
-
Impedance 14 kW
-
Rotary INPUT GAIN switch (sensitivity) 0 dB to -15 dB
-
OUTPUT LEVEL switch 94, 100, 108, 114 dB SPL
-
Common mode rejection ratio (CMRR) > 56 dB, 100 Hz to 15 kHz
-
Maximum input level 24 dBu
-
Digital input/output (only with DIM 1 installed)
-
Signal format XLR, BNC AES3, S/P-DIF
-
Impedance XLR, balanced 110 W (input)
-
Impedance BNC, unbalanced 75 W (input and output)
-
Switchable inputs Analog / Digital A / Digital B / Digital A+B
-
Digital converter: resolution 16 ... 24 bit resolution
-
Digital converter: 22.05 / 24 / 32 / 44.1 / 48 / 64 / 88.2 / 96 / sampling frequencies [kHz]* 176.4 / 192
-
Input sensitivity -18 dBFS = 100 dB SPL at 1 m
-
Dynamic range: A-N, N-A > 116 dB(A), 123 dB(A)
-
THD at 1 kHz (THD+noise): analogue delayed, digital < -104 dB, < -106 dB (typical)
-
Maximum delay: time / distance 409.5 ms / 140.87 m (462' 2")
-
Maximum delay: 10.2 frames at 40 ms/picture lip sync 12.3 frames at 33 ms/picture
-
Minimum delay: time / distance 0.1 ms / 3.4 cm (1 3/8")
-
Power consumption (idle operation): 60 W (+ 5 W with DIM 1 installed)
-
Power consumption (maximum power) 800 W
-
Dimensions H x W x D 645 x 330 x 444 mm
-
External volume 93 l
-
Weight 35.0 kg (+ 100 g with DIM 1 installed)
-
Transducers - bass, midrange, tweeter: Magnetically shielded 250 mm (10"), 75 mm (3"), 25 mm (1")
-
Mounting points: Threads on rear panel for attaching LH 41 support plate or LH 42 suspension plate
-
Enclosure surface; colour: Painted wood and polyurethane; anthracite (RAL 7021) or other RAL colour Back panel: steel, black anodised.
To find out more...
The Neumann KH 420 is designed for use as a mid-field loudspeaker and as a main loudspeaker. It can be used as a front speaker in medium-sized multi-channel listening systems, or as a rear speaker in large multi-channel listening systems.
You may also like
Spotlight on
A legendary brand for decades, present in all the major recording studios, Neumann is a guarantee of high quality and professionalism. The Beatles, Natalie Cole, Celine Dion, Bryan Adams and Beyoncé... all use this exceptional brand with the famous U87, and the TLM49 at the top of the list. In home studio, the TLM103 and TLM102 condenser microphones are the most popular. For studio sound on stage opt for the KMS105. In recent years, Neumann has also offered the high-end KH80, KH120 and KH310 monitors.
