Rme - HDSPe AIO
These models in stock might interest you:
The RME HDSPe AIO is a PCI Express audio card, offering 38 channels up to 192 kHz, with SPDIF, AES / EBU, ADAT and MIDI. A true versatile solution, the HDPSe AIO is equipped with the latest AN and NA converters, with a signal-to-noise ratio of over 112dB. All I / O of the PCIe card is operational simultaneously, including SPDIF (on RCA) and AES / EBU (on XLR). The RME HDSPe AIO is the PCI Express version of the HDSP 9632.
Specifications
-
RME HDSPe AIO PCI Express audio card, offering 38 channels up to 192 kHz, with SPDIF, AES / EBU, ADAT and MIDI.
-
1 x analog input / output (192 kHz).
-
1 x ADAT input / output (192 kHz compatible via S / MUX4).
-
1 x S / PDIF input / output (192 kHz).
-
1 x AES / EBU input / output (192 kHz).
-
1 x MIDI input / output.
-
1 x Headphone Output (192 kHz).
-
TotalMix.
-
Full Duplex Packet Communication: Allows transfer rates up to 500 MB / s.
-
Internal sampling rates: 32 kHz 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz.
-
External sampling frequencies: 28 kHz to 200 kHz.
-
8 buffer sizes / latencies available: 0.7 ms, 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms.
-
Map Settings: Editable in real time.
-
Clock modes: Slave and master with automatic and intelligent master / slave selection.
-
Enhanced Mixed Mode: All inputs and outputs are available simultaneously.
-
TMS (Track Marker Support): Supports CD / DAT track markers and CD subcode playback.
-
Status Window for Recording and Playback: Display mode and sampling rate.
-
Jitter: Less than 1ns.
-
Digital inputs and outputs: Without earth with galvanic isolation by transformer.
-
Analog Inputs and Outputs: Active Balancing.
-
Signal to noise ratio @ 24 bits / 192 kHz: 112 dB RMS without weighting or 115 dBA.
-
Analog reference levels: three selectable sensitivities.
-
Maximum Input / Output Levels (0 dBFS @ HiGain): +19 dBu.
-
Headphone Output: Low impedance output (75 Ohms) with separate D / A converter.
Information
Spotlight on
Since 1996, RME has been providing high-quality equipment for computer-based music recording (CBR): Converters, USB, FireWire and/or Thunderbolt audio interfaces with built-in DSP, which together with TotalMix FX offer numerous mixing, effects and even remote control features. The majority of RME's products are Mac, PC and iOS compatible, giving you the freedom to record and produce, wherever the music takes you. Whether it's for the stage or studio, you can count on your RME audio equipment to deliver the quality and reliability you expect.