Static Microphone

Bundle Rode NT2A Version 2-way + condenser microphone pop filter, suspension and cable 6m

ARTICLE N° 26801
  • Bundle Rode NT2A
  • Characteristics :
  • The Dual HF1 1 ", 5 micron diaphragm, sprayed gold.
  • Wheel control, high-pass filter and pad.
  • Directional variable 3 positions: Omni, Cardioid and Figure 8.
  • High-pass filter variable 3 positions: Flat, 40Hz or 80Hz.
  • 3 position variable pad: 0 dB, -5 dB or -10dB.
  • Ultra low noise, transformerless circuitry.
  • Wide dynamic range.
  • Internal Suspension.
  • Designed and manufactured in Sydney, Australia.
  • 10 year warranty.
  • Specifications:
  • Acoustic Principle: Pressure. Pressure gradient transducer
  • Electronics: JFET impedance converter with bipolar output buffer
  • Directionality: Variable 3 positions: ominidirectionnel, Cardioid and Figure 8
  • Bundle Rode NT2A
  • Frequency response: 20 Hz - 20 kHz
  • Output Impedance: 200 Ohms
  • Sensitivity: -36 dB re 1V / Pa (16mV / Pa @ 94 dB SPL) ± 2 dB @ 1 kHz
  • Equivalent noise: 7 dB (A-weighted IEC651)
  • Maximum output voltage: + 16 dBu (@ 1kHz, 1% THD 1 kohm)
  • Dynamic: 140 dB (A-weighted IEC651)
  • Maximum SPL: 147 dB (@ 1kHz, 1% THD 1 kohm); 157 dB (@ 1Hz, 1% THD 1 kohm) - maximum pad
  • Signal / Noise: 87 dB (A-weighted IEC651)
  • Power supply: Phantom P48 (48V)
  • Output connector: 3-pin XLR, symmetrized between 2 output (+), Pin 3 (-) and Pin 1 (ground)
  • Weight (micro only): 860 g
  • Shipping Weight: 1.08 kg
  • Dimensions: Ø 55 mm - Length 209 mm
  • Comes with a soft pouch, pop filter, suspension and cable 6m
Microphone professional studio condenser capsule and wide (2.5 mm), with pattern selector, high pass filter and mitigation. These characteristics give it an enhanced creativity and versatility. The three switches with 3 positions on the body of the microphone offer the freedom to modify the directivity (figure 8, cardioid and omni), the filter response (flat response, mitigation at 80 or 40 Hz), and mitigation ( 0, -5 or -10 dB).
Capsule type
 Capacitor
Application
 Singing, Speaking voice, Video / broadcast, Strings instruments, Wind instruments
Directivity
 Cardioid, Bidirectional (Figure-8), Omnidirectional
Switchable pad
 Yes
Switchable Bass-Cut filter
 Yes
Acoustic pressure (dB)
 140
Shockmount included
 Yes
Popfilter
 External included
Microphone clip
 Non
Complete set
 Yes
Power supply
 Via +48 V phantom power supply
Connectors
 XLR male 3 pins
Packaging
 Single unit
Color
 Nickel
At the heart of the NT2-A is the HF1 capsule, designed and manufactured in Australia. The frequency response of this new recording techniques used today while evoking the silky and soft character of the legendary microphones of the 50 and 60. The NT2-A of the control variables used to select between a unidirectional directivity in 8 or Cardioid. The high-pass filter position offers the choice a flat response, 80Hz or 40 Hz. Finally, the microphone attenuation pad can vary between 0 dB, -5 dB and -10 dB. The NT2-A comes with a soft pouch and a microphone clamp M2.

User's advice Static Microphone
NT2-A Rode

NT2-A Rode
/5
 

2 User's advice

PATRICIA P 21/05/2020
  4 /5
Purchase Checked
Bon produit
0 0 report
SERGE T 21/06/2016
  4 /5
Purchase Checked
Très bon micro
0 0 report

Spotlight on