Sennheiser - EW 135 G3 1G8

This will be a reliable, easy to use and install. The system will at High Frequencies between 1795 and 1800 MHz technology (legalized band) with an analog broadcast with HDX compander for clear sound. The system will offer 12 usable channels simultaneously. To answer all the scenarios, the receivers must be able to operate a portable transmitter or a microphone to hand. The system will provide wireless synchronization of the infrared emitter for easy configuration. It must propose a way of automatic search for free frequencies by scanning frequencies. Issuers will be able to operate on rechargeable battery and have external contacts to directly charge the specific battery (optional) without removing the transmitter. The issue: Micro hand: Type SKM100 1G8 SENNHEISER The transmitter, with a power of 10 mW will offer 12 channels in a range between 1795 and 1800 MHz (band legalized). It will ship with two LR6 batteries but can also work with a specific battery. The show will be with analog Compander HDX. The sensitivity will be adjustable up to 48 dB in steps of 6 dB. A backlit display allows the visualization of information and menus. It will be possible to "block" the settings to avoid any risk of mishandling. Two switches "on / off" and "mute" will be accessible at the rear of the microphone and hidden under a hinged plastic ring thus avoiding any awkwardness. It must be synchronized wirelessly with infrared receiver for easy configuration. The autonomy should be about 8am. An indicator light will certify the status of the internal battery. The body of the transmitter must be metallic. Hand transmitter: Type SENNHEISER SK100 1G8 The transmitter, with a power of 10 mW will offer 12 channels in a range between 1795 and 1800 MHz (band legalized). It will ship with two LR6 batteries but can also work with a specific battery. The show will be with analog Compander HDX. It will have two entries on 3.5mm jack: the first level and the second in MIC LINE level. These 2 inputs possess a differentiated sensitivity adjustable. A backlit display allows the visualization of information and menus. It will be possible to "block" the settings to avoid any risk of mishandling. The switch "on / off" must be protected against the risk of tampering with and press "mute" will be positioned on top of the transmitter, thus facilitating its use. It must be synchronized wirelessly with infrared receiver for easy configuration. The battery, once installed in the battery compartment should be able to charge through the body of the transmitter via the contactors. The autonomy should be about 8am. An indicator light will certify the status of the internal battery. The body of the transmitter must be metallic. Reception: Fixed Receiver: Type 1G8 Sennheiser EM100 The receiver will be fixed type audio output with XLR and 6.35mm. The switching on and off will be a key "ON / OFF". The receiver will offer up to 12 channels in the frequency range between 1795 and 1800 MHz (band legalized) and will be with analog Compander HDX. The antenna must be connected to the back of the receiver to BNC plugs and must be deported. The receiver must be of type "true diversity" for a high quality reception. It must propose a way of automatic search for free frequencies by scanning frequencies. A backlit display allow you to view different information: reception quality audio level selected channel. The receiver will be powered by an AC adapter or directly by the antenna BNC input connectors when a splitter type 1G8 ASA 1 will be used. The body of the receiver must be metallic.