Pack SM7B + FetHead Shure
Dynamic Microphone

The Shure SM7B and Triton Audio FetHead bundle combines a large-diaphragm dynamic microphone with a microphone preamp. The aim is to make the most of the microphone’s natural character on its own, without distorting it with the preamp stages of an interface or mixing desk. Thanks to the combination of the SM7B and the FetHead, this bundle is a perfect alternative to the SM7dB, offering a solution based on two separate components.

ARTICLE N° 123743
At the heart of this system, the SM7B features a large capsule with a frequency response ranging from 50 Hz to 20 kHz. A range of settings can be accessed via the Flat, Bass Rolloff and Presence Boost switches, allowing the sound reproduction to be tailored to the requirements of the signal being processed.

Reinforced magnetic shielding also helps protect against certain electromagnetic interference that may affect the signal in busy technical environments.

For its part, the FetHead adds up to +27 dB of gain thanks to a low-noise Class A FET amplifier. This design allows the preamplifier to be inserted directly into the XLR link, whilst maintaining a simple and compact architecture within the audio chain.

Both units retain a fully analogue approach to signal processing and will integrate easily into a wide range of audio setups.
Capsule type
 Dynamic
Application
 Speaking voice, Video / broadcast, Content creation
Directivity
 Cardioid
Switchable Bass-Cut filter
 Yes
Switchable pad
 Yes
Weight
 770 g
Power supply
 Via +48 V phantom power supply
Frequency response, low limit
 50 Hz
Frequency response, upper limit
 20 kHz
Components
 Microphone + Preamplifier
Connectors
 XLR male 3 pins, XLR female 3 pins
Packaging
 Single unit
  • Dynamic microphone + preamp pack, comprising:
  • .
  • Shure SM7B
  • Dynamic microphone
  • Series: SM
  • Manufacturer’s part number: RPM106
  • Transducer type: dynamic
  • Large capsule
  • Polar pattern: cardioid
  • Frequency response: 50 Hz – 20 kHz
  • Sensitivity: −59 dBV/Pa (1.12 mV/Pa)
  • Impedance: 150 Ω
  • Switches: Flat / Bass Rolloff / Presence Boost
  • Built-in pop filter
  • Strong magnetic shielding
  • Mounting: yoke mount
  • Mechanical isolation via internal suspension
  • Connectors: 3-pin XLR
  • Supplied with: windscreen, cover plate
  • Dimensions: 190 x 96 x 64 mm
  • Weight: 766 g
  • +
  • Triton Audio FetHead
  • Microphone preamplifier
  • Country of manufacture: Netherlands
  • Line gain booster
  • Gain: +27 dB (3000 Ω load)
  • Frequency response: 10 Hz ⭢ 100 kHz (+/- 1 dB)
  • Technology: low-noise Class A FET amplifier
  • Compatibility: dynamic, ribbon and tube microphones
  • Requires power supply: +48 V phantom power
  • Phantom power NOT transmitted to the microphone
  • Connectors:
  • Balanced female XLR input
  • Balanced male XLR output
  • Input impedance: 22 kΩ
  • Construction: metal casing
  • Dimensions: 130 x Ø30 mm
To complete an audio setup of this kind, consider adding a high-quality balanced XLR cable, as well as a sturdy articulated arm or stand.

A few cable ties and a suitable carrying case can also help to keep your workspace tidy and well protected.
Shure - Pack SM7B + FetHead Shure - Pack SM7B + FetHead
New
387,50 € excl VAT
In Stock
Shippable immediately
+infos
Guarantee 3  years
Anais
Anais
Tristan
Tristan
Do you need help?

Spotlight on

SHURE, the most popular brand among musicians! The SM58 wired microphone for vocals and SM57 for instruments, the SM7B for vocals or the PG24E PG58 are the worldwide references available at Sonovente.com. Also available are the superb SRH studio and DJ headsets, the PGX and SLX HFs, the 55SH T2 skull mic... 
Shure has developed USB mics that rival their analog mics in reliability and sound. Artists trust their wireless systems to stay connected in every situation. Shure has made professional gear accessible to the masses, creating superior in-ear monitors

Retour en haut de page