Studio Monitors

Pair of Avantone Pro Passive MixCube 5.25 "Monitor Speakers These high-resolution, cream-colored passive monitors feature an armored enclosure, and a wide band for fixed or external installations Their design is inspired by the legendary 5C Sound Cubes used in virtually every major studio over the past 25 years.

ARTICLE N° 57518
  • Avantone Pro Passives MixCube 5.25 "
  • Type of system: Pair of dynamic shielded monitor speakers
  • Frequency response: 90Hz to 17000Hz
  • Impedance: 8 ohms Nominal
  • SPL / Sensitivity: 93dB @ 1w / 1 meter
  • Recommended power: 10 to 200 watts
  • Loudspeaker: 5.25-inch molded aluminum frame
  • Housing: blistered / 18mm MDF / Dacron acoustic padded
  • Inputs: Terminal Blocks Nickel-plated high-end connection (allowing the connection of double banana plugs)
  • 16.5 cm cubic design baffle covered with several layers of glossy lacquer (butter cream color)
  • MDF Particleboard Enclosure Ultra-strong laminates produce very little resonance
  • Rounded corners and edges to reduce diffraction and provide better aesthetics
  • Special designed paper membrane manufactured in Canada using the best pasta with New Zealand mica fibers to provide more lightness and strength.
  • Canvas suspension made in Japan with the same uniform thickness tolerance.
  • Upper plate and T-shaped element of low carbon steel speaker (Sumitomo 1008).
  • 1.22 kg magnets are Y-40 (MIL-SPEC) and feature a high power / low distortion design.
  • Anodized aluminum laminated terminal board plate.
  • 7mm thick neoprene pad installed under the baffle to act as a non-slip acoustic insulator.
  • Base for standard microphone stand (16 mm) integrated under the speaker.
Distance
 Near-Field
RMS power (W)
 200
Acoustic pressure (dB)
 90
Impedance
 8 Ohm
Manual frequency correction
 No
DSP / cut-off frequency
 No
Connectors
 Câble Nu
Digital input
 0
Operating position
 Vertical
Frequency response
 90 Hz – 17 kHz
Power supply
 Power adapter (included)
Speaker
 5"
Color
 White
Packaging
 Pair