B&C Speakers - 10CL64 8 Ohm
105,83 €
excl VAT
including eco-part : 0,90 €
In Stock
Usually ships within 15 days
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Speaker driver
The B&C Speakers 10CL64 8 Ohm is a 10-inch speaker with 500W AES power, a 2.5-inch copper voice coil, a neodymium magnet and a frequency response of 65Hz to 4kHz, designed for accurate and efficient reproduction of the audio spectrum.
ARTICLE N° 103646
Presentation
The B&C Speakers 10CL64 8 Ohm is a 10-inch speaker designed to deliver optimum performance in professional sound reinforcement systems requiring precise reproduction of midrange and bass. Equipped with an AES power of 500 W and a 2.5-inch copper voice coil, it guarantees efficient heat dissipation and reliable power handling.
Its design incorporates a neodymium magnet for a significant reduction in weight while optimizing the magnetic flux. Its sensitivity of 96 dB at 1 W/1 m ensures efficient conversion of the electrical signal into acoustic pressure, while its frequency response of 65 Hz to 4 kHz allows it to excel in applications requiring dynamic and balanced reproduction.
The architecture of the B&C Speakers 10CL64 8 Ohm is based on an exponential cone with waterproof treatment on its front face, its double roller suspension ensures optimal control of the deflection, while its single spider contributes to the mechanical stability of the whole.
With a resonance frequency (Fs) of 63 Hz and a total quality factor (Qts) of 0.31, this speaker is suitable for a bass-reflex load of 29 liters tuned to 65 Hz.
Its maximum linear excursion (Xmax) of 5.2 mm allows it to deliver precise bass without noticeable distortion, even at high volume.
Its design incorporates a neodymium magnet for a significant reduction in weight while optimizing the magnetic flux. Its sensitivity of 96 dB at 1 W/1 m ensures efficient conversion of the electrical signal into acoustic pressure, while its frequency response of 65 Hz to 4 kHz allows it to excel in applications requiring dynamic and balanced reproduction.
The architecture of the B&C Speakers 10CL64 8 Ohm is based on an exponential cone with waterproof treatment on its front face, its double roller suspension ensures optimal control of the deflection, while its single spider contributes to the mechanical stability of the whole.
With a resonance frequency (Fs) of 63 Hz and a total quality factor (Qts) of 0.31, this speaker is suitable for a bass-reflex load of 29 liters tuned to 65 Hz.
Its maximum linear excursion (Xmax) of 5.2 mm allows it to deliver precise bass without noticeable distortion, even at high volume.
Other features
-
B&C Speakers 10CL64 8 Ohm
-
10" (25 cm) speaker
-
Power 500 W AES
-
Ref: 10CL64-8
-
Supplier: ALT10CL648
-
Sensitivity 96 db 1w/1m
-
Frequency response: 65 Hz - 4 kHz
-
2.5" (64 mm) Copper voice coil
-
Magnet: Neodymium
-
Recommended load: 29 liters, tuned to 65 Hz
-
Fs: 63 Hz
-
Qts: 0.31
-
Xmax: 5.2 mm
-
Suspension: Double roll
-
Exponential cone with waterproof front treatment
-
Single spider
-
RCK10CL648 repair kit sold separately
-
Dimensions: Ø258 x 112 mm
-
Weight: 2 kg
Additional documents
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
