EMG - 57TW Long Shaft Black
104,17 €
excl VAT
including eco-part : 0,07 €
Out of stock
Guarantee 3
years
Fred
Eric
Do you need help?
With its copper logo and Black finish, the EMG 57TW Long Axe pickup has style. Alnico/steel magnets and dual active mode: humbucker warmth, single-coil bite. It's Les Paul compatible thanks to the long shaft potentiometer.
ARTICLE N° 108280
Presentation
The long-axis version of the EMG 57TW Black pickup features a two-part sound architecture. In humbucker mode, it develops an output voltage of 4.5 V. In single-coil mode, the frequency rises to 3.47 kHz for livelier attacks.
Designed for wide-spaced bridge positions, it fits Floyd Rose and similar tremolos. The taller case and neat black finish add an imposing touch.
The solderless EMG quick-connect wiring system simplifies installation. Everything is supplied: cables, stereo jack, diagrams, screws, battery bus and 25K potentiometers.
Even at 9V, it consumes just 160 µA. This means it can run for up to 1,500 hours. It also accepts a voltage of 27V, for those who want to push the limits. This microphone doesn't just follow - it blazes its own trail.
Designed for wide-spaced bridge positions, it fits Floyd Rose and similar tremolos. The taller case and neat black finish add an imposing touch.
The solderless EMG quick-connect wiring system simplifies installation. Everything is supplied: cables, stereo jack, diagrams, screws, battery bus and 25K potentiometers.
Even at 9V, it consumes just 160 µA. This means it can run for up to 1,500 hours. It also accepts a voltage of 27V, for those who want to push the limits. This microphone doesn't just follow - it blazes its own trail.
Other features
-
EMG 57TW Long Shaft Black
-
Splittable microphone
-
Series : 57
-
Position : Bridge
-
Logo : Copper plated
-
Magnets : Alnico and steel
-
Long shaft (Les Paul) 19 mm
-
.
-
Double winding mode :
-
Resonant frequency: 1.77 kHz
-
String output voltage: 3.00 V
-
Strum output voltage : 4.50 V
-
.
-
Single winding mode :
-
Resonance frequency: 3.47 kHz
-
String output voltage: 2.00 V
-
Strum output voltage: 3.00 V
-
.
-
Output noise (60 Hz) : -107 dB
-
Output impedance : 10 kΩ
-
Power consumption at 9V : 160 µA
-
Battery life: 1500 hours
-
Max supply voltage: 27 V DC
-
Trem spacing (Floyd/Fender) 52 mm
-
Long shaft potentiometer (Les Paul) 19 mm
-
.
-
1 push/pull potentiometer 25K (volume or tone)
-
1 25K tone potentiometer
-
1 TW microphone cable (38 cm)
-
2 connector cables (14 cm)
-
1 output cable (15 cm)
-
1 battery cable (18 cm)
-
1 battery bus (B245)
-
1 stereo output jack
-
Fixing screws and springs
-
Wiring diagrams (solderless EMG system)
-
.
-
Length: 78.5 mm
-
Height: 22.8 mm (higher than EMG standard)
-
Width: 38.1 mm
To find out more...
The EMG 57TW Long Axis works well at 18V or more. The dynamic range expands, giving greater clarity and power.
In single-coil mode, you reduce the bass for greater definition. In double-coil mode, you accentuate the midrange for more body.
Mixing the 57TW with a passive microphone creates a rich contrast. The buffered signal prevents level loss.
In single-coil mode, you reduce the bass for greater definition. In double-coil mode, you accentuate the midrange for more body.
Mixing the 57TW with a passive microphone creates a rich contrast. The buffered signal prevents level loss.
Additional documents
You may also like
Spotlight on
With EMG,
customize your instrument with the best guitar pickups. EMG, the reference in
terms of sound and precision.
