EMG - 57TW Long Shaft Chrome
120,83 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
The EMG 57TW Long Shaft Chrome pickup takes an assertive approach with its alnico and steel magnets. Its dual sonic personality changes in a single movement: dense humbucker or incisive single coil. Chrome finish, EMG logo, modern active architecture - this pickup combines neat aesthetics with precise response.
ARTICLE N° 108281
Presentation
The EMG 57TW long-axis Chrome pickup stands out for its attention to detail. Its active structure provides two distinct profiles: a dual-coil mode for powerful textures, and a more articulate single-coil mode with a higher frequency (3.47 kHz). Changeover is via a discreet and reliable push/pull switch.
Thanks to its 52 mm centre-to-centre distance, this model fits seamlessly into Floyd or Fender-type guitars with spaced bridges. The long shaft potentiometer (19 mm) ensures unchanged compatibility with Les Paul-type bodies.
Every component is supplied for rapid installation: solderless wiring, TW connectors, battery cables, stereo jack, clear diagrams and screws and bolts. The power supply can go up to 27V for a wider headroom, with minimal power consumption.
Chrome finish, copper logo, slightly raised casing: the 57TW has something to please both eyes and ears. A microphone designed for serious configurations.
Thanks to its 52 mm centre-to-centre distance, this model fits seamlessly into Floyd or Fender-type guitars with spaced bridges. The long shaft potentiometer (19 mm) ensures unchanged compatibility with Les Paul-type bodies.
Every component is supplied for rapid installation: solderless wiring, TW connectors, battery cables, stereo jack, clear diagrams and screws and bolts. The power supply can go up to 27V for a wider headroom, with minimal power consumption.
Chrome finish, copper logo, slightly raised casing: the 57TW has something to please both eyes and ears. A microphone designed for serious configurations.
Other features
-
EMG 57TW Long Shaft Chrome
-
Micro double winding (splittable)
-
Series : 57
-
Position : Bridge
-
Logo : Copper plated
-
Magnets : Alnico and steel
-
Long shaft (Les Paul) 19 mm
-
.
-
Double winding mode :
-
Resonant frequency: 1.77 kHz
-
String output voltage: 3.00 V
-
Strum output voltage : 4.50 V
-
.
-
Single winding mode :
-
Resonance frequency: 3.47 kHz
-
String output voltage: 2.00 V
-
Strum output voltage: 3.00 V
-
.
-
Output noise (60 Hz) : -107 dB
-
Output impedance : 10 kΩ
-
Power consumption at 9V : 160 µA
-
Battery life: 1500 hours
-
Max supply voltage: 27 V DC
-
Trem spacing (Floyd/Fender) 52 mm
-
Long shaft potentiometer (Les Paul) 19 mm
-
.
-
1 push/pull potentiometer 25K (volume or tone)
-
1 25K tone potentiometer
-
1 TW microphone cable (38 cm)
-
2 connector cables (14 cm)
-
1 output cable (15 cm)
-
1 battery cable (18 cm)
-
1 battery bus (B245)
-
1 stereo output jack
-
Fixing screws and springs
-
Wiring diagrams (solderless EMG system)
-
.
-
Length: 78.5 mm
-
Height: 22.8 mm (higher than EMG standard)
-
Width: 38.1 mm
To find out more...
The EMG 57TW Axe Long Chrome combines Alnico and steel. As a result, the bass remains clean in palm mute, even when tuned low.
For a Les Paul, you can group the weights together on a rail. The short cables pass under the push/pull without constraint.
Changing the value of the tone cap modulates the brightness. The volume pot descends more gently than with a passive.
For a Les Paul, you can group the weights together on a rail. The short cables pass under the push/pull without constraint.
Changing the value of the tone cap modulates the brightness. The volume pot descends more gently than with a passive.
