EMG - 57TW Black Chrome
120,83 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
Beneath its chic looks, the EMG 57TW Black Chrome pickup hides two faces. As a humbucker, it pushes hard. As a single, it bites. Triple active windings, responsive push/pull, alnico and steel magnets and direct response! This model isn't just ornamental: it's clean and precise.
ARTICLE N° 107938
Presentation
The EMG 57TW Black Chrome pickup doesn't just offer one sound. It offers two very distinct sounds in the same box. Its push/pull action triggers a real personality shift: dense humbucker or simple incisive coil. The active architecture is based on three coils with hybrid magnets.
Output voltages vary according to mode. In humbucker mode, the mic pushes at 4.5 V. In single, it remains responsive and precise at 3.0 V. Noise remains low, even under stress: -107 dBV at 60 Hz.
This model uses a short format (10 mm) adapted to the Strat. It mounts on a standard bridge, 49 mm apart. No special tools are required. Solderless wiring, connectors and components are included.
It's a model designed for those who want to control everything: from gain to sound colour, without compromise. A compact solution that never loses impact.
Output voltages vary according to mode. In humbucker mode, the mic pushes at 4.5 V. In single, it remains responsive and precise at 3.0 V. Noise remains low, even under stress: -107 dBV at 60 Hz.
This model uses a short format (10 mm) adapted to the Strat. It mounts on a standard bridge, 49 mm apart. No special tools are required. Solderless wiring, connectors and components are included.
It's a model designed for those who want to control everything: from gain to sound colour, without compromise. A compact solution that never loses impact.
Other features
-
EMG 57TW Black Chrome
-
Series: EMG TW Series
-
Type : Dual mode microphone (humbucker / single coil)
-
Triple-coil active microphone
-
Humbucker / single selection via push-pull
-
Magnets : Alnico + steel (hybrid)
-
Single resonance frequency: 3.47 kHz
-
Double resonance frequency: 1.77 kHz
-
String output voltage: 2.00V (single)
-
String output voltage: 3.00V (double)
-
Strum output voltage: 3.00V (single)
-
Strum output voltage : 4.50V (double)
-
Output impedance : 10 kΩ
-
Noise floor : -107 dBV (60 Hz)
-
Power consumption: 160 μA at 9V
-
Maximum power supply: 27V DC
-
9V battery life: approx. 1500 hours
-
Active humbucker format
-
Thickness: 28 mm (1.1")
-
Standard EMG height: 23 mm (0.9")
-
Standard spacing (Tune-O-Matic) 49mm
-
Short shaft potentiometer (Strat) 10 mm
-
Direct mounting or with springs supplied
-
Integrated single/double coil switching
-
Volume master
-
Volume pickup
-
Tone master
-
Tone pickup
-
Terminals H1 to H6
-
Solderless assembly possible
-
1 Push-Pull potentiometer 25K (volume/tone)
-
1 output cable (15 cm)
-
2 connector cables (14 cm)
-
1 battery cable (18 cm)
-
1 TW pickup cable (38 cm)
-
1 B245 Pickup Buss
-
2 passive tone controls (25K)
-
Stereo output jack
-
Foam for 9V battery
-
Mounting springs and screws
-
Full manual with wiring diagrams
-
Length: 78.5 mm
-
Height: 28 mm
-
Depth: 38.1 mm
-
Approximate weight: 390 g (with pot and wiring)
To find out more...
The EMG 57TW Black Chrome mic from the EMG TW Series gives you fine control live on stage. You can manage the master volume and pickup volume to fine-tune each mic.
The 10 kΩ output impedance ensures compatibility with a variety of effects. It preserves dynamics while limiting signal loss.
The groundless bridge eliminates the ground problems sometimes encountered. This simplifies installation and reduces parasitic noise.
The warmer resonance of the double coil at 1.77 kHz enriches round tones. Solderless installation facilitates quick changes, leaving you free to experiment.
The 10 kΩ output impedance ensures compatibility with a variety of effects. It preserves dynamics while limiting signal loss.
The groundless bridge eliminates the ground problems sometimes encountered. This simplifies installation and reduces parasitic noise.
The warmer resonance of the double coil at 1.77 kHz enriches round tones. Solderless installation facilitates quick changes, leaving you free to experiment.
