EMG - 57TW Floyd Long Shaft Black
104,17 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
Triple coil, hybrid alnico and steel magnets, controlled voltage: the EMG 57TW Floyd Axe long pickup is on a roll. Autonomy climbs to 1,500 hours, even with intensive use. Its active format attaches to a thick body. The integrated switch bridges the gap between roughness and precision.
ARTICLE N° 107962
Presentation
With the 57TW Floyd long-axis pickup in Black, EMG has opened up a whole new world of versatility. Every detail counts: triple coil, integrated push/pull, Alnico/steel magnets, stable voltage. It changes mode with a flick of the wrist: full double coil or single incisive.
The active electronics can handle up to 27V without disturbing the sound balance. The output level varies according to the attack: up to 4.5 V in strum. Its background noise remains contained, even on stage.
This model can be adapted to a Floyd or Fender configuration, thanks to its 52 mm centre distance. Its long shaft potentiometer (19 mm) is ideal for Les Paul-type guitars. Direct or suspended mounting: everything is included in the kit.
Solderless connectors, 25K push-pull, calibrated cables, screws and full schematic: nothing is missing. The 57TW Floyd maintains a solid base, while leaving room for expressive adjustments. A modern solution, designed for those who like to control every nuance.
The active electronics can handle up to 27V without disturbing the sound balance. The output level varies according to the attack: up to 4.5 V in strum. Its background noise remains contained, even on stage.
This model can be adapted to a Floyd or Fender configuration, thanks to its 52 mm centre distance. Its long shaft potentiometer (19 mm) is ideal for Les Paul-type guitars. Direct or suspended mounting: everything is included in the kit.
Solderless connectors, 25K push-pull, calibrated cables, screws and full schematic: nothing is missing. The 57TW Floyd maintains a solid base, while leaving room for expressive adjustments. A modern solution, designed for those who like to control every nuance.
Other features
-
EMG 57TW Floyd Long axle Black
-
Series: EMG TW Series
-
Type : Dual mode microphone (humbucker / single coil)
-
Triple-coil active pickup
-
Floyd/Fender tremolo string spacing: 52 mm
-
Potentiometer axis length : Long (Les Paul type) - 19 mm
-
Humbucker / single selection via push-pull
-
Magnets : Alnico + steel (hybrid)
-
Single resonance frequency: 3.47 kHz
-
Double resonance frequency: 1.77 kHz
-
String output voltage: 2.00V (single)
-
String output voltage: 3.00V (double)
-
Strum output voltage: 3.00V (single)
-
Strum output voltage : 4.50V (double)
-
Output impedance : 10 kΩ
-
Noise floor : -107 dBV (60 Hz)
-
Power consumption: 160 μA at 9V
-
Maximum power supply: 27V DC
-
9V battery life: approx. 1500 hours
-
Active humbucker format
-
Thickness: 28 mm (1.1")
-
Standard EMG height: 23 mm (0.9")
-
Trem spacing (Floyd/Fender) 52 mm
-
Long shaft potentiometer (Les Paul) 19 mm
-
Direct mounting or with springs supplied
-
Integrated single/double coil switching
-
Volume master
-
Volume pickup
-
Tone master
-
Tone pickup
-
Terminals H1 to H6
-
Solderless assembly possible
-
1 Push-Pull potentiometer 25K (volume/tone)
-
1 output cable (15 cm)
-
2 connector cables (14 cm)
-
1 battery cable (18 cm)
-
1 TW pickup cable (38 cm)
-
1 B245 Pickup Buss
-
2 passive tone controls (25K)
-
Stereo output jack
-
Foam for 9V battery
-
Mounting springs and screws
-
Full manual with wiring diagrams
-
Length: 78.5 mm
-
Height: 28 mm
-
Depth: 38.1 mm
-
Approximate weight: 390 g (with pot and wiring)
To find out more...
The long potentiometer on the EMG 57TW Floyd Axe long Black pickup is easy to operate, even when playing standing up.
The volume control remains precise, even when gradually increased. One day, you can invert two masses on purpose, just to test. The result? A slight, unexpected saturation on soft attacks.
This pickup is well-suited to this kind of experimentation. The solderless modularity helps a lot in rehearsals. Changing a cable, a pot, or even reversing a push-pull is a breeze. No need for a soldering station.
It's on stage that this cabling really comes into its own. Nothing stands in the way of last-minute adjustments.
The volume control remains precise, even when gradually increased. One day, you can invert two masses on purpose, just to test. The result? A slight, unexpected saturation on soft attacks.
This pickup is well-suited to this kind of experimentation. The solderless modularity helps a lot in rehearsals. Changing a cable, a pot, or even reversing a push-pull is a breeze. No need for a soldering station.
It's on stage that this cabling really comes into its own. Nothing stands in the way of last-minute adjustments.
