Guitar Microphone

This 57TW Floyd Axe long Brushed Chrome pickup from EMG is all about versatility without sacrificing character. Three coils, hybrid magnets, direct switch. Voltage rises without spurious noise, even at 27 volts. Quick assembly, active format, solderless wiring: it's all there, except for the complications.

ARTICLE N° 107957
This EMG 57TW Floyd long-axis Brushed Chrome pickup extends the spectrum of your audio without complicating your lutherie. It has three active coils and switches between two modes via push/pull. The single coil pierces the mix, the humbucker densifies it.

The electronics handle 27 volts while consuming just 160 μA. Autonomy climbs to 1,500 hours. Impedance remains stable at 10 kΩ. Even under stress, the signal retains its sharpness thanks to the low background noise.

The microphone is 52 mm apart, designed for Floyd-type vibratos. The long shaft potentiometer fits directly into Les Paul-type hollow or solid bodies.

Terminals H1 to H6 make for easy mounting. The kit includes the push/pull unit, complete connectors, battery foam, springs and screws. No special tools are required.

The 57TW offers a direct configuration, two sound textures and proven mechanics. It's a real alternative for those who want to modulate.
  • EMG 57TW Floyd Long axle Brushed Chrome
  • Series: EMG TW Series
  • Type : Dual mode microphone (humbucker / single coil)
  • Triple-coil active pickup
  • Trem spacing (Floyd/Fender) 52 mm
  • Long shaft potentiometer (Les Paul) 19 mm
  • Humbucker/single-coil selection via push-pull
  • Magnets : Alnico + steel (hybrid)
  • Single resonance frequency: 3.47 kHz
  • Double resonance frequency: 1.77 kHz
  • String output voltage: 2.00V (single)
  • String output voltage: 3.00V (double)
  • Strum output voltage: 3.00V (single)
  • Strum output voltage : 4.50V (double)
  • Output impedance : 10 kΩ
  • Noise floor : -107 dBV (60 Hz)
  • Power consumption: 160 μA at 9V
  • Maximum power supply: 27V DC
  • 9V battery life: approx. 1500 hours
  • Active humbucker format
  • Thickness: 28 mm (1.1")
  • Standard EMG height: 23 mm (0.9")
  • Direct mounting or with springs supplied
  • Integrated single/double coil switching
  • Volume master
  • Volume pickup
  • Tone master
  • Tone pickup
  • Terminals H1 to H6
  • Solderless assembly possible
  • 1 Push-Pull potentiometer 25K (volume/tone)
  • 1 output cable (15 cm)
  • 2 connector cables (14 cm)
  • 1 battery cable (18 cm)
  • 1 TW pickup cable (38 cm)
  • 1 B245 Pickup Buss
  • 2 passive tone controls (25K)
  • Stereo output jack
  • Foam for 9V battery
  • Mounting springs and screws
  • Full manual with wiring diagrams
  • Length: 78.5 mm
  • Height: 28 mm
  • Depth: 38.1 mm
  • Approximate weight: 390 g (with pot and wiring)
The EMG 57TW Floyd Axe long Brushed Chrome pickup responds well to moderate fuzz and delay pedals. The tone control on the pickup alone subtly modifies the colour, giving interesting nuances.

The 9V battery easily lasts more than fifteen hours on repeat. A back-up battery is essential to avoid any interruptions.

This triple-coil active pickup delivers crisp clarity, even with powerful effects. Each setting adds its own character without loss of definition.

Solderless cabling makes it easy to make quick adjustments in session. Ease of use is combined with great flexibility.
EMG - 57TW Floyd Long Shaft Brushed Chrome
EMG - 57TW Floyd Long Shaft Brushed Chrome
120,83 € excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3  years
Fred
Fred
Eric
Eric
Do you need help?

Spotlight on