Guitar Microphone

The EMG 57TW Floyd Axe long Chrome is a pickup that activates two very different types of grain under the same bonnet. The push/pull action switches between a nervous single and a more massive double. The Floyd spacing and long axle mean there's no need to tinker. An active pickup with alnico and steel magnets designed for guitars that take a beating.

ARTICLE N° 107963
The EMG 57TW Floyd Chrome long-axis pickup is a robust, modular solution. It combines a triple active coil and two distinct voices in a single housing. Push/pull activates either a dense humbucker or a single, livelier coil.

Each mode has its own frequency and voltage. In single mode, it climbs to 3.47 kHz and 2.00 V. In double, it anchors lower, with 4.5 V in strum. The noise level remains stable: -107 dBV at 60 Hz.

No soldering iron is required for installation. The kit includes cables, connectors, stereo jack and 25K push-pull. It can be mounted directly or on springs, depending on the configuration.

Its 52mm Floyd/Fender spacing and long shaft potentiometer are ideal for guitars with vibrato and thick bodies. It accepts up to 27V for extra dynamic range. The EMG 57TW Chrome is visually discreet, but incisive in action.
  • EMG 57TW Floyd Long axle Chrome
  • Series: EMG TW Series
  • Type : Dual mode microphone (humbucker / single coil)
  • Triple-coil active pickup
  • Trem spacing (Floyd/Fender) 52 mm
  • Long shaft potentiometer (Les Paul) 19 mm
  • Humbucker/single-coil selection via push-pull
  • Magnets : Alnico + steel (hybrid)
  • Single resonance frequency: 3.47 kHz
  • Double resonance frequency: 1.77 kHz
  • String output voltage: 2.00V (single)
  • String output voltage: 3.00V (double)
  • Strum output voltage: 3.00V (single)
  • Strum output voltage : 4.50V (double)
  • Output impedance : 10 kΩ
  • Noise floor : -107 dBV (60 Hz)
  • Power consumption: 160 μA at 9V
  • Maximum power supply: 27V DC
  • 9V battery life: approx. 1500 hours
  • Active humbucker format
  • Thickness: 28 mm (1.1")
  • Standard EMG height: 23 mm (0.9")
  • Direct mounting or with springs supplied
  • Integrated single/double coil switching
  • Volume master
  • Volume pickup
  • Tone master
  • Tone pickup
  • Terminals H1 to H6
  • Solderless assembly possible
  • 1 Push-Pull potentiometer 25K (volume/tone)
  • 1 output cable (15 cm)
  • 2 connector cables (14 cm)
  • 1 battery cable (18 cm)
  • 1 TW pickup cable (38 cm)
  • 1 B245 Pickup Buss
  • 2 passive tone controls (25K)
  • Stereo output jack
  • Foam for 9V battery
  • Mounting springs and screws
  • Full manual with wiring diagrams
  • Length: 78.5 mm
  • Height: 28 mm
  • Depth: 38.1 mm
  • Approximate weight: 390 g (with pot and wiring)
The very low noise floor of the EMG 57TW Floyd Axe long Chrome microphone makes it easy to adjust the gain. You can push the amp without fear of parasitic saturation. The 3.47 kHz frequency in single mode helps to cut through a busy mix.

With its gentle overdrive and subtle delay, this model reveals its full dynamic range. Independent management of master and pickup volumes gives precise control.

This configuration is ideal for gradual ascents and descents. Live, it delivers expressive, nuanced playing. All in all, a lively sound experience.
EMG - 57TW Floyd Long Shaft Chrome
EMG - 57TW Floyd Long Shaft Chrome
120,83 € excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3  years
Fred
Fred
Eric
Eric
Do you need help?

Spotlight on