EMG - 60AX Black Chrome
97,50 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Guitar Microphone
Designed for the neck position, the 60AX Black Chrome pickup adds grit and clarity. Its Alnico magnet filters out high frequencies while maintaining tension. It reacts strongly: up to 8 volts in rhythm. EMG compatibility opens up a wide range of combinations.
ARTICLE N° 108091
Presentation
With the EMG 60AX Black Chrome microphone, you're taking another approach to active sound. This model takes the grain of the classic 60 and breathes new life into it. The Alnico magnet works with the X preamp to smooth out the edges.
The result is a microphone that's precise and less harsh. The midrange comes through with more warmth. On hard attack, the voltage rises to 8 volts. The signal remains stable without excessive saturation.
No ground wire is required. And thanks to the solderless connectors, you can install everything in just a few minutes. The included cabling covers the entire assembly.
The 9-volt battery lasts about 3,000 hours. And the 2 kΩ output impedance keeps the signal clean, even with a long cable.
This model is designed for strummers who want active, natural audio. It sits on the neck for blues, soft leads or textured chords. It's a simple, expressive solution.
The result is a microphone that's precise and less harsh. The midrange comes through with more warmth. On hard attack, the voltage rises to 8 volts. The signal remains stable without excessive saturation.
No ground wire is required. And thanks to the solderless connectors, you can install everything in just a few minutes. The included cabling covers the entire assembly.
The 9-volt battery lasts about 3,000 hours. And the 2 kΩ output impedance keeps the signal clean, even with a long cable.
This model is designed for strummers who want active, natural audio. It sits on the neck for blues, soft leads or textured chords. It's a simple, expressive solution.
Other features
-
EMG 60AX Black Chrome
-
Dual-coil guitar pickup
-
Series: EMG Active X Series
-
Magnet : Alnico
-
Logo: Gold
-
Resonance frequency: 1.84 kHz
-
Output voltage (cord): 3.00 V
-
Output voltage (scratched): 8.00 V
-
Background noise: -105 dB
-
Compatible with all active EMG microphones
-
Solderless installation thanks to connector cables
-
Operates on one 9V battery (not supplied)
-
Battery life: 3000 h
-
Power consumption: 80 µA at 9V
-
Output impedance: 2.00 kΩ
-
Max. supply voltage: 27V DC
-
No string ground required
-
Standard spacing (Tune-O-Matic) 49mm
-
Potentiometer short shaft (Strat) 10 mm
-
1 x Mic cable: 38 cm
-
1 x Output cable: 15 cm
-
2 x Connector cables: 14 cm
-
1 x Battery cable: 18 cm
-
1 x Power cable: 14 cm
-
1 x Active volume potentiometer (25K)
-
1 x Active VLPF tone control
-
1 x 12B stereo jack (output)
-
1 x Insulating foams for battery
-
1 x Screw kit (screws + springs)
-
1 x Pickup Buss distribution box (for 2 microphones)
-
Length: 69.8 mm
-
Height: 22.8 mm
-
Width: 38.1 mm
To find out more...
The 60AX is a pickup that handles delicate fingerpicking and vigorous attacks with ease. Its dynamics respond without hesitation, whatever the style. The very low noise level makes recording easy, even in the home studio. Recordings remain clear, with no audible interference.
You can test the 60AX with single-coil microphones for hybrid sounds. The mix adds richness and a rebellious balance.
You can test the 60AX with single-coil microphones for hybrid sounds. The mix adds richness and a rebellious balance.
