EMG - 85 Brushed Black Chrome
90 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Guitar Microphone
EMG goes all out with this 85 Brushed Black Chrome pickup, designed for big riffs. From hot blues to razor-sharp metal, it's a no-brainer. Compatible with all EMG humbuckers, it's equally at home on neck or bridge. Solderless installation, cables supplied, plug it in, it roars.
ARTICLE N° 108231
Presentation
The EMG 85 Brushed Black Chrome is a pickup that's got plenty of power, plenty of grit and that little something that catches the ear. It doesn't do things by halves. Its secret? Alnico V magnets cut for a dense, expressive sound.
Rhythms come out muscular, solos sing with relief. It shines in the neck position for thick, round textures. But it bites when you put it on the bridge. Its versatility is astonishing, from classic rock to the driest death.
No soldering iron required, thanks to EMG's signature solderless system. All the cables are supplied: volume, tone, 9V battery, dual input/output, stereo jack. Just open the box, wire it up and play.
Compatible with all the brand's humbuckers, standard 49 mm spacing, classic dimensions: no need to worry about integration. Want a racy sound without the headaches? It's ready to go.
Rhythms come out muscular, solos sing with relief. It shines in the neck position for thick, round textures. But it bites when you put it on the bridge. Its versatility is astonishing, from classic rock to the driest death.
No soldering iron required, thanks to EMG's signature solderless system. All the cables are supplied: volume, tone, 9V battery, dual input/output, stereo jack. Just open the box, wire it up and play.
Compatible with all the brand's humbuckers, standard 49 mm spacing, classic dimensions: no need to worry about integration. Want a racy sound without the headaches? It's ready to go.
Other features
-
EMG 85 Brushed Black Chrome
-
Pickup type: Active humbucker
-
Series : EMG Original Series
-
Position : Neck or bridge
-
Magnets : Alnico V magnets
-
Tone: Warm, powerful, with fluid attack
-
Versatility: Blues to extreme metal
-
Output level: High, smooth and dynamic
-
Output impedance: 10 kOhm
-
Resonant frequency: 1.87 kHz
-
Output voltage (string) : 3.10 V
-
Output voltage (strumming) : 4.50 V
-
Noise floor (60Hz) : -101 dBV
-
Power consumption at 9V : 400 µA
-
Maximum power supply : 27 Volts DC
-
9V battery life: 600 hours
-
Connection: Exclusive EMG solderless system
-
Installation: No earthing required
-
Standard spacing (Tune-O-Matic) 49mm
-
Short shaft potentiometer (Strat) 10 mm
-
1 volume potentiometer 25k
-
1 25k tone potentiometer
-
1 drum bus
-
1 stereo output jack
-
1 in/out bus for two microphones
-
1 microphone cable
-
2 connection cables
-
1 output cable
-
1 battery cable
-
1 pair of fixing screws + springs
-
Dimensions (W × H × D): 69.8 × 38.1 × 22.8 mm
-
Weight: ≈ 170 g
To find out more...
In a mix with several rhythm tracks, the EMG 85 microphone integrates well. It rarely requires heavy EQ processing. Its natural clarity often obviates the need for a noise gate.
In A tuning, the bass remains tight, with no excessive compression. The pickup retains attack even at low settings.
Pick thickness and angle have a slight influence on response. Each variation subtly modifies the dynamics.
In A tuning, the bass remains tight, with no excessive compression. The pickup retains attack even at low settings.
Pick thickness and angle have a slight influence on response. Each variation subtly modifies the dynamics.
