EMG - H1 Neck Black Chrome
90 €
excl VAT
including eco-part : 0,07 €
Out of stock
Guarantee 3
years
Fred
Eric
Do you need help?
The EMG H1 Black Chrome passive neck pickup focuses on opening up the sound. The midrange breathes, and there's no muddy effect. Ceramic/steel magnets, battery-free wiring, included components: it's all there. Designed for 60s-inspired riffs, it adds depth to every chord, even when played lightly.
ARTICLE N° 108538
Presentation
The EMG H1 Neck Black Chrome pickup is for those who love a straightforward sound. Designed for a neck position, it retains depth even on full chords. The voicing remains airy, without hollowing out the midrange or boosting the top end too much.
This passive pickup uses over-wound coils that add punch without compressing. The ceramic/steel magnets balance the attack with good hold. The result? A solid base for clear, responsive, saturation-free shots.
No need for batteries or soldering: everything is passive and ready to wire. The included EMG connector simplifies installation, with all the components needed to make it part of a complete kit.
Compatibility with VLPF or EXG modules means you can shape the sound to suit your playing style. With its 13.65 kOhm of resistance and 7.15 H of inductance, it fits in well with a humbucker duo. It's an obvious choice for those who prefer clarity to artefacts.
This passive pickup uses over-wound coils that add punch without compressing. The ceramic/steel magnets balance the attack with good hold. The result? A solid base for clear, responsive, saturation-free shots.
No need for batteries or soldering: everything is passive and ready to wire. The included EMG connector simplifies installation, with all the components needed to make it part of a complete kit.
Compatibility with VLPF or EXG modules means you can shape the sound to suit your playing style. With its 13.65 kOhm of resistance and 7.15 H of inductance, it fits in well with a humbucker duo. It's an obvious choice for those who prefer clarity to artefacts.
Other features
-
EMG H1 Neck Black Chrome
-
Type: Passive humbucking microphone
-
Series : EMG-HZ
-
.
-
High-efficiency passive pickup
-
Overwound coils for extra punch
-
Ceramic/steel magnets (type C/S)
-
Clear, open sound in neck position
-
Perfect for 60's / 70's rock sounds
-
Simple solderless assembly
-
Solderless EMG connection included
-
No 9V power supply required
-
Red wire = winding, not power supply
-
DC resistance: 13.65 kOhm (H1)
-
Inductance: 7.15 H (H1)
-
Resonance frequency (1 MΩ): 3.12 kHz
-
Resonance frequency (500k + 6m cable): 1.65 kHz
-
Resonance impedance: 74 kOhm
-
Compatible with VLPF, EXG, etc circuits
-
5-wire connections: green, white, red, black, shielded
-
Mono output, with bridge earthing
-
Standard spacing (Tune-O-Matic) 49mm
-
Potentiometer short shaft (Strat) 10 mm
-
.
-
1 volume potentiometer 500k
-
1 500k tone potentiometer
-
1 mono output jack
-
1 bus in/out for 2 microphones
-
1 pair of screws + springs
-
1 microphone cable (38 cm)
-
2 connection cables (14 cm)
-
1 output cable (15 cm)
-
1 bridge ground cable (15 cm)
-
1 IDC connector for bridge ground
-
.
-
Length: 78.5 mm
-
Width: 38.1 mm
-
Height: 22.8 mm
-
Approximate weight: 160 g
Additional documents
You may also like
Spotlight on
With EMG,
customize your instrument with the best guitar pickups. EMG, the reference in
terms of sound and precision.
